retorquing head

I've always heard to do it with engine warm. It seems like that is the instructions in my manual I used when I did my A.
 
I CANNOT BELIEVE THAT DEERE RAN THE TRACTORS ON THE ASSEMBLY LINE AND THEN RETORQUED THE HEAD WE HAVE PROBABLY DONE OVER A HUNDRED HEAD REPLACEMENT WE ALLWAYS USE A GOOD SEALANT AND SET TORQUE WRENCH 10 POUNDS OVER SPEC NEVER HAD A PROBLEM YET
 
I just did my A about two months ago. I didnt have much experience with this, so I HAD to do it.
It was a waste of time. None of the nuts tightened up. BUT, I learned something.
 
40 years of never doing it, and another 30 years of my dad never doing it. We have never had an issue. I would agree with the folks that say the factory doesn't do it either.
 
if using new head bolts the first torque will do it. be advised that depending on which engine you are working with the torque values change with new bolts.
 
Brian, got the engine all back together this last weekend. Seems to run fine, I think that its a little more peppy and snappy which is awesome. We torqued the head nuts to 150 ft/lb and used a head gasket from sharps but it seems to weep a little antifreeze between the head and block. Just a few drops over night. So I'm not sure what to do about that. Thanks again for the block
 
if its just weeping a little run it good chance it will seal itself keep a close eye on it if it gets worse have the head shaved a little for flatness maybe even deck the block a little to make sure its all flat i had no trouble with the block at all so probably just the head is a little warped
 
Of the two heads I've done, one I retorqued and the other I did not. When I retorqued it, most of the bolts turned.

If you want to be sure you've done an excellent job, there is no reason to not go the extra mile. However, over-torquing is not the way to do it. Torque specs are given for a reason.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top