Rototiller

[Jim Arano]

I have an 11" wide rototiller or rotohoe that I need blades for. I don"t know what brand it is since all the decals are wiped off. It has 126 blades and the blade rpm is about 432. If anyone can identify the brand, or know where I might buy blades, I would appreciate it. Photos attached.

 

[Anonymous-0]

Does it say anything on the little tag in the second photo left side, not trying to be smart. chris

 

[maxwell99]

good luck with new tines.

my friend has a scrap dealership and some farmers bring the big tillers in for scrap when they need new tines.

king cutter brand tines are $25 for a set of two.
if your machine uses the same type blades that would be $1575 plus new bolts.

i might just use the tiller as is if it will still work.

 

[Anonymous-0]

Try Shoup Catalog, see if anything looks similar

 

[Trac1]

http://www.cleancutter.com/

 

[Jim Arano]

I have tried clean cutter, they have nothing that matches. If I can"t find any I will probably cut all the tabs off the rotor and have flanges made that I can slip on the tube and weld that are drilled to match Howard Rototiller blades

 

[Tim(nj)]

Did you look here?
tiller blades