Rough looking early 9N (Pics)

Winehead

Member
Here are some pictures. See earlier thread on this forum. Serial #9N II20, seller asking $800. Block is not cracked. Didn't make that clear in first post. Wife thinks this could be restored as "hers" tractor ("his" is my 49 8N). Let me know what you think..I just hate to see the old thing rotting away out there!

Wine

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1438.jpg" target="_blank">
DSCF1438.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1439.jpg" target="_blank">
DSCF1439.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1440.jpg" target="_blank">
DSCF1440.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1441.jpg" target="_blank">
DSCF1441.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1438.jpg" target="_blank">
DSCF1438.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1444.jpg" target="_blank">
DSCF1444.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1445.jpg" target="_blank">
DSCF1445.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1446.jpg" target="_blank">
DSCF1446.jpg" border="0" alt="Photobucket
</a>

<a href="http://s8.photobucket.com/albums/a6/dukes909/?action=view&current=DSCF1447.jpg" target="_blank">
DSCF1447.jpg" border="0" alt="Photobucket
</a>
 
Ifn I wanted a 9N (which I don't, and wouldn't, because of the differences between a 9N and an 8N) I would offer him $500, and see how he acted.
 
Its not a really early model cuz it has the starter button on top of the tranny cover and not in the dash .The axles are the rivit style also .

I would give $500 or walk if it was my choice .
 
8n front hubs and the front dogleg and grill looks rusted through . If the motor doesnt rotate I would think more like $300 .
 
If that were in Colorado or eastern Kansas, I would buy it for $800. The "junkers" around here are going for $1,500. I'd love to have it.

Where is this? maybe the hauling wouldn't be too bad... Just kidding, you go get it!
 
Here are a couple of CraigsList items local to me for you to compare to.

And these may be priced a little high, as to what similar ones can be had for.



<h2><a href="http://atlanta.craigslist.org/grd/527495515.html">1948 8N Ford
Tractor - $2950</a></h2>
<hr />Reply to: <a href="mailto:[email protected]?subject=1948%208N%20Ford%20Tractor%20-%20$2950">
[email protected]</a>

Date: 2008-01-03, 6:24PM EST





I have a tractor FOR SALE. It runs great and has NO problems. Tires are good. I
have had too many calls that only wanted to talk, take directions and never
show.It is a 1948 and will do anything that any other 1948 will do.You can
respond to this with a phone number and I will call you back. Please do not
contact me if you only want to talk about tractors.Please do not contact me if
you want to tell me what kind of tractor that you have had, your Dad had or your
Grand Dad had.Also don&#39;t contact me if you don&#39;t have the money. I am a little
flexible on the price but will not give the tractor away.There are no implements
with this tractor.It is located in Eatonton GA, on Lake Oconee, if you don&#39;t
know where that is, please look at a map. I can deliver.
<table summary="craigslist hosted images">
<tr>
<td align="middle">
01010301041201030120080103811af778586d414d5d0073e7.jpg"
</td>
<td align="middle">
0101000104000103102008010306ce813bc9a1589a7500c800.jpg"
</td>
</tr>
<tr>
<td align="middle"></td>
<td align="middle"></td>
</tr>
</table>




<ul class="blurbs">
<li>Location: Eatonton, GA </li>
<li>iit&#39;s NOT ok to contact this poster with services or other commercial
interests</li>
</ul>


PostingID: 527495515







<h2><a href="http://atlanta.craigslist.org/grd/531054959.html">FORD 8N TRACTOR
1948 - $2500</a></h2>
<hr />Reply to: <a href="mailto:[email protected]?subject=FORD%208N%20TRACTOR%20%201948%20%20-%20$2500">
[email protected]</a>

Date: 2008-01-07, 8:22AM EST





FORD 8N 1948 RUNS GREAT

JUST IN TIME FOR THAT SPRING GARDEN



COMES WITH HARROR AND RHINO CUTTER



CALL 770-634-0078
<table summary="craigslist hosted images">
<tr>
<td align="middle">
010104010212010408200801075fb341639f185374ae00d463.jpg"
</td>
<td align="middle"></td>
</tr>
<tr>
<td align="middle"></td>
<td align="middle"></td>
</tr>
</table>




<ul class="blurbs">
<li>Location: LAWRENCEVILLE </li>
<li>it&#39;s NOT ok to contact this poster with services or other commercial
interests</li>
</ul>


PostingID: 531054959


 
Appears to be a Frankenstein which isnt necessarily bad. If its really a 39 block I"d love to get the block from it. It may be worth more in parts than whole. It lookes like a late 9n or 2n with 39 rear wheels and a 39 block but later axels and fenders?
THe hood dog legs are early style not sure about the hood. I"d stay at or below 500 if it does not run.
 
Wow, those are pretty shiny compared to this thing. Like to see something more "rustbuckety" to get better idear, but I sure apprecieate everyone chiming in here with opinions...keep em coming!
 
This past fall I payed $100 for a 1951 8N and it had a dearborn loader and part of a sherman back hoe on it. I have since put in about 100 hours and about $300 but its now a good running tractor. That one looks like a mutt is I ever saw one and I would not pay more then $300-500 for it
Hobby farm
 
Wonder if the "#11" on the tranny was an auction # or salvage yard # for replaced tranny? That would fit with the hybrid theory.
 
Are those 32" wheels?
Those are early centers for sure.
If the wheels were any good, them and the centers would be worth a pretty penny.
A good early block would be worth something too.
As a parts tractor most Ns will fetch $500. If the above mentioned items were good then probably a bit more. Knowing what part of the country it's in is always helpful.
Good pictures.
Let us know what you do.
 
that beast there could pass for the way my 46 2N looked when it was brought home..And I mean rough looking but i knew it still had a heart in there that could be made to beat again.Here is where i have got it so far this yr... rebuilt motor and all...
Quicky paint job was done, but this summer it will be redone right, and i have the grill to go back in it. I wish I had taken a before picture of it, but never thought to do it. But that pic. u have is almost a perfact match to what mine looked like. If you get it, best of luck, these old beasts still have a beating heart in there. Just need some tlc to get it beating again.
Ford2n.jpg
 
It definitely looks restorable to me, Wine.

Indeed it looks like it has been used in the not too distant past as evidenced by the plugs/wires and 12V conversion.

So long as you look at restoration as hobby and not a money making prospect, it looks like a good project.

Dean
 
I cut and pasted two local craig list postings. I think the price on the grove tractor is way high, I am sure you could restore it, but once you were done what would you have? What would a mongrel like that bring at auction? I think the best and highest use of the tractor pictured, is as a parts tractor for someone looking to complete a similar tractor. It could make many N's happy or one restorer sad. There are also many 3000.00 price range N tractors listed on craigs list but I picked two cheap ones to motivate you to resist this one. I understand it is calling your name as you drive by, but it is just trying to lure you in to break your heart. If yu avoid it now, you will save yourself alot of grief later. Start with the best you can afford and a restoration will turn out better. If this is a rare and hard to find example that will be quite valuable when completed, then go for it, but if it is as it appears a run out overpriced mutt, try and resist its calling. I think if you shop around you can find a good runner for about 1500.00 to 2000.00. Even if you need to do repair it, you can at least evaluate it and insure that the major parts work. If the grove tractor you pictured has a frozen block, oil pan, rearend, you may not even notice it until you have too much money in it to walk away. It could have many undetected problems that you will not be able to detect until it moves under its own power. I think that will cost 1000.00 minimum. Seems like to much to ante in to play....If you are not planning to part it out, free may cost too much.

ford 9n tractor - $1600

--------------------------------------------------------------------------------
Reply to: see below
Date: 2007-12-09, 5:00PM CST


I have a 9n ford tractor for sale, runs great, new plugs wires cap and rotor.
The rear tires have 90% tread and very little weather checking. the fronts are
wheather checked and one has a slow leak. the hood and side panels are there and in decent shape, but the grill is missing, but it does have a ford guard on the front. Also comes with a back blade that works fine. Asking 1600 but will consider any offers, need to sell. call 612 328 3068 during the day sorry no pics available at this time.




Location: harris mn
it's NOT ok to contact this poster with services or other commercial interests

PostingID: 504023662


Ford Tractor

--------------------------------------------------------------------------------
Reply to: [email protected]
Date: 2008-01-19, 10:39AM CST


1946 Ford 2n. Tires like new. 12 volt conversion. Battery and radiator new last summer. Hydraulic cylinder rebuilt last summer, pump changed (used) last summer. Old pump included, may or may not be good. New drawbar and manual also. Back blade in picture not included. $1700. 715-781-2858 cell/shop or 715-248-7626 home. [email protected]




it's NOT ok to contact this poster with services or other commercial interests

PostingID: 544395242


--------------------------------------------------------------------------------
ONE OF MANY....
 
It could make many N's happy or one restorer sad.

I couldn't have put that in any better words!:wink:

Thats an odd looking blade in the pic, or at least I've never saw one like it.
 
I just bought (pick it up next weekend) a running 2N with 12v conversion, Sherman tranny, new radiator. Runs good, starts great. Picked it up for $1500.00. Needs paint and new fenders.
Didn't really need it, but wanted it for kid memories and there's that open slot in the pole barn. Have Allis' and Farmall's but there's always been a special spot for the early Ford's.
 
Yes, the backblade is quite farmerized, but he is keeping it, so he may be quite proud of its performance. I also noticed the custom grill.

Since I run across this type of usable rig often, I just wanted to show examples, not specific units to reccommend...
 
Looks just like the 2N with 8N engine I bought 2 years ago for $400.00. Had a new radiator, and Sherman in it. Once I rewired it, and figured out the correct idle jet in the carb, it runs great with no engine work. I still haven't changed the rear oil, clean and full. Good tires with original rims, and still looks rough. Even had green moss growing on her... He wanted $500, but offered $400, and he took it. I'm thinking $500 tops, and say "CASH", that makes the difference many times. Fact is, YOU know the potential, but does ANYONE ELSE want it??? Sometimes you fall into a pile of manure and come out smelling like a rose. ;-)
 
Matt,

How do you drive yours with the steering wheel bent up like that? How much does a steering wheel cost?
Did yours have the top link atachment broken off and missing links on the lift arm like the pictured tractor does? How much do the replacement parts cost for that?
How do you adjust engine RPM without a throttle lever as the pictured tractor is missing? How much time/money to run that assembly down?
Do you think that sitting with an open carb for years may cause any issues that would take time/money? I do not think you could drive this one away
 
Thats actually not a farmerized back blade ,, it's a terracer blade,, I believe the name is cardigan,, I have one ,, from whet I hear they are pretty rare and may have some value,,, mine came with my fergy,, just wanted to put my 2 cents into it,, pat

<a href="http://s49.photobucket.com/albums/f297/maplehillfrm/?action=view&current=May02632.jpg" target="_blank">
May02632.jpg" border="0" alt="Photobucket
</a>
 
Buy it!! [I'd offer $500. though]. Those rear tires and rims are hy-crop and very collectable. You might be able to get a good share of your money back just selling those. Well worth the money as a parts tractor if nothing else.
 
Matt, I don't think that is a 2N, check out the I-beam radius rods (early 9N) and the engine is not a 8N engine. Check the alternator on the right side (8N engine would be on the left)
 
(quoted from post at 13:03:19 01/20/08) That is strange. Check the floorboards out, only has one. On the left side, none on the right.

And looks like one Ford script fender. This things got more oddities than Johnny Cash's Cadillac!
 
It does appear to have both "floorboards". I can just make out the right side one. It just has some weeds &amp; junk grown up over it. You can see the vertical piece of flat stock that comes up from the floorboard to loop over the foot peg though.
 
1950 8N, $500, a little wiring, air in tires, misc attaching loose parts that were with it (radiator, grill, solenoid)..... driving same afternoon it was hauled home in 2007. No parts added/replaced, not even points! Sounds like a steal, but if you can't run/drive it, it's a gamble & must be heavily discounted. Our thought was that if it was trashed internally, we still had $500 spare parts for our other N.
latest_8N.jpg
 
Those rear rims are not hy-crop! Those are original 9n 32" rear wheels. If my memory serves me correctly, they would be 9X32's. But you are correct in saying that they are rare.
 
&lt;img src="http://i192.photobucket.com/albums/z232/JMOR_photo/latest_8N.jpg"&gt;

That's gotta be a 19" motorsickle tire....
Never thought of that but hey, whatever works!
 
(quoted from post at 13:26:08 01/21/08) 1950 8N, $500, a little wiring, air in tires, misc attaching loose parts that were with it (radiator, grill, solenoid)..... driving same afternoon it was hauled home in 2007. No parts added/replaced, not even points! Sounds like a steal, but if you can't run/drive it, it's a gamble &amp; must be heavily discounted. Our thought was that if it was trashed internally, we still had $500 spare parts for our other N.
&lt;img src="http://i192.photobucket.com/albums/z232/JMOR_photo/latest_8N.jpg"&gt;

Looks like a bargain...Is that a spin on oil filter?
 
Ha! Not yet. Funny how mixed the reactions were here. Some said get it for parts while others said run the other way w/o looking back.

It"s been sitting there a while, I"ll let it sit a while longer, at least till I finish working on my 8N.

Wine
 

Spin-on filter and motorcycle tires. Been about 9 months ago and those weather cracked old cycle tires have been holding air ever since! Unintentionally ran a rear flat &amp; cracked it to pieces, so had to spend some money there about 4 months after got it.
 
(quoted from post at 12:43:25 01/23/08)
Spin-on filter and motorcycle tires. Been about 9 months ago and those weather cracked old cycle tires have been holding air ever since! Unintentionally ran a rear flat &amp; cracked it to pieces, so had to spend some money there about 4 months after got it.

I like the way you think!
If it ain't broke, don't fix it.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top