I don't know what set up I am on. I just put the link from logo at the top of the page in my Bookmarks, hit latest posts and scroll through the first 2-3 pages, when/IF I do come on. I figure a day or 2 is old enough to rely to. Sometimes if I have internet I will check older posts. This is my new "farm" forum. I am too many years from farming now for Ag Talk. I am more interested in building old cars and pickups. I like smaller, older rigs that I can put Mustang II front suspension, S-10 Iron duke engine and aluminium power glide in. Manual rack and pinion and brakes, elect fan and 12v water pump to keep parasite power loss to a minimum .
8 years ago now, I rebuilt a Chevy curbmaster motorhome, original frame, S-10 running gear. 6 years ago I built an RV from the cab of a 1936 IHC cabover truck. Front wheel drive from a Cavalier and beefed up Cavalier rear axle, 8' aluminum U-haul box from a Datsun moving van with a very light interior. 3 years ago I took a 1976 short Chevy van, installed an Iron duke 4 cyl and running gear from an S-10. 4'wide bed across the rear with chuck wagon style kitchen under the bed, out back. It is what we use for an RV now.
The last couple years my Son and I have built a couple truck/tractors to haul hay from the ranch in Christmas Valley to Tillamook dairy customers. Using 90's Freightliner wrecks, single axle, light weight, Series 50 4cyls and a 7 speed, full air ride, 8 lug axles with disc brakes. First was a 1956 Kenworth log truck, the 2nd was a '60 Freightliner cabover retired consolidated tractor. We have also built 2 sets of aluminium hay doubles. We run all low profile super singles on aluminium wheels. This years project is a '62 Peterbuilt, next year will be another set of trailers and finish up the interior. That will be my last big truck. I have street rodded a '52 Chevy pickup, built a '56 Chevy Cameo from a pickup cab with shortened quarter panels from a '56 sedan. Chopped the cab 3" and channeled the cab to match quarter panel height. I built a '28 ford track roadster on coilovers. A '52 Chevy cabover "pickup", dropped the cab on a pickup frame, matched the upper front cabover fenders and hood to the firewall and welded in pickup wheel wells. Welded the front section into a forward tilting hood. and raised the grill. Formed my own bed from 16 ga. sheets and trailer fenders....James