Scrolling down the list

Mike(NEOhio)

Well-known Member
Location
Newbury, Ohio
After I open a thread to read or reply and return to the list it always returns to the top. If it's not in the view I have to scroll down to find where I left off. I'd prefer it returns to where I left off. BTW, since the system has changed it seems there are fewer new posts, just my observation.
 
Posts for this month are 155% of this month in 2023 (if my math is right, it's like 496 vs 320 per day, new user registrations are up by a much higher percentage. It's above 2022 too but not by as much. Social media has impacted chitchat forums for quite sometime but posting counts have definitely rolled that back. My guess is we have less off-topic and more on-topic but I have nothing to back that up with, it would take a qualitative study involving where posts are and what they are about. The perception of having fewer posts may come from seeing fewer threads. If that is the issue, it can be accounted for if you have the "Filter by first message" option checked since that option only lets you see threads a day old in busier forums. The option intentionally causes you to miss out on some of the discussions going on.

On the other issue, I have seen that if you have the Threaded View option turned on. New posts are interspersed throughout a thread with that option on. That will confuse the thread display as to where it starts you out, and if there is no new post at the very bottom, it may place you at the top of the message. It's a side effect of threaded view. I use the threaded view and have noticed it as have others. When that is turned off, I'm not sure, but I think you may come in at the top if you a looking at a thread that has been completely read and had no new posts. I will test that out because that is problematic if so.
 
i do not use Threaded View.I

And if I come back to a thread that has no New post in it, it will start at the beginning of the thread.
Thanks for that, I sort of thought it would be that way since if you hadn't seen the thread, you should start reading it from the top.
 
Posts for this month are 155% of this month in 2023 (if my math is right, it's like 496 vs 320 per day, new user registrations are up by a much higher percentage. It's above 2022 too but not by as much. Social media has impacted chitchat forums for quite sometime but posting counts have definitely rolled that back. My guess is we have less off-topic and more on-topic but I have nothing to back that up with, it would take a qualitative study involving where posts are and what they are about. The perception of having fewer posts may come from seeing fewer threads. If that is the issue, it can be accounted for if you have the "Filter by first message" option checked since that option only lets you see threads a day old in busier forums. The option intentionally causes you to miss out on some of the discussions going on.

On the other issue, I have seen that if you have the Threaded View option turned on. New posts are interspersed throughout a thread with that option on. That will confuse the thread display as to where it starts you out, and if there is no new post at the very bottom, it may place you at the top of the message. It's a side effect of threaded view. I use the threaded view and have noticed it as have others. When that is turned off, I'm not sure, but I think you may come in at the top if you a looking at a thread that has been completely read and had no new posts. I will test that out because that is problematic if so.
If one looks mainly at Tractor Talk and Tractor Tales, not reviewing all the forums, traffic may appear down some now that some threads and posts that used to be in those places are in Community Features. I believed I was seeing more posts from new members in general, than there were before the changeover, which is borne out with your information here.
 
If one looks mainly at Tractor Talk and Tractor Tales, not reviewing all the forums, traffic may appear down some now that some threads and posts that used to be in those places are in Community Features. I believed I was seeing more posts from new members in general, than there were before the changeover, which is borne out with your information here.
Click the "new posts" button at the top, and look at the listing of new posts.
In fine print each listing shows the category/forum for that contains a new post.
Most are not in TFT or Tales.
 
Click the "new posts" button at the top, and look at the listing of new posts.
In fine print each listing shows the category/forum for that contains a new post.
Most are not in TFT or Tales.
I agree, I generally scan all the forums. To those that focus on TFT, Tales, and maybe only a couple other forums posts may seem down, while overall the count is up.
 
If one looks mainly at Tractor Talk and Tractor Tales, not reviewing all the forums, traffic may appear down some now that some threads and posts that used to be in those places are in Community Features. I believed I was seeing more posts from new members in general, than there were before the changeover, which is borne out with your information here.
That was my thinking. New people only come here to ask questions or discuss on-topic issues. The number of new people is phenomenal, especially when taking into account that new users are far less frequently spammers registering. In the old system, it would never be more than 5 people a day who were real users. Now spam registrations are extremely low and real users much higher than the overall total in the old system (which did include the spammers). It still shocks me that things were so bad before. Another factor was that even the real users who would register, would seldom get the activation email which meant they may as well have not registered as they wouldn't be able to post (and didn't but for maybe 1 or 2 a day). Looking at new users who have posted is where there was marked difference last time I looked.

DoubleO7's research may bear out that the on to off topic ratio has shifted. It could also suggest that off-topic has stayed the same while on-topic is growing, which is easily explained by the influx of new users who, as mentioned, would have no reason to be here other than on-topic discussion.
 
I left here because of the old format and I was getting years and years from farming. Came back, by chance when somehow I saw the new format. I think it was a link on another forum. Checked it out and good to see old "faces". I use the "new post", at the top, only, as I do else where, and scan the last 3 pages. It is the same setup as other forums I use. Still checking it out. I like it....James
 
I'm guessing that the users who only look at one or two forums and are using the "Threaded View/Classic" version are missing a lot of traffic.
I agree with the caveat that it's specifically the "Filter by first message" option that causes traffic to be missed, the actual Threaded View option just has some minor irritants associated with it, but doesn't hide traffic from people like the filter does.
 
I don't know what set up I am on. I just put the link from logo at the top of the page in my Bookmarks, hit latest posts and scroll through the first 2-3 pages, when/IF I do come on. I figure a day or 2 is old enough to rely to. Sometimes if I have internet I will check older posts. This is my new "farm" forum. I am too many years from farming now for Ag Talk. I am more interested in building old cars and pickups. I like smaller, older rigs that I can put Mustang II front suspension, S-10 Iron duke engine and aluminium power glide in. Manual rack and pinion and brakes, elect fan and 12v water pump to keep parasite power loss to a minimum .

8 years ago now, I rebuilt a Chevy curbmaster motorhome, original frame, S-10 running gear. 6 years ago I built an RV from the cab of a 1936 IHC cabover truck. Front wheel drive from a Cavalier and beefed up Cavalier rear axle, 8' aluminum U-haul box from a Datsun moving van with a very light interior. 3 years ago I took a 1976 short Chevy van, installed an Iron duke 4 cyl and running gear from an S-10. 4'wide bed across the rear with chuck wagon style kitchen under the bed, out back. It is what we use for an RV now.

The last couple years my Son and I have built a couple truck/tractors to haul hay from the ranch in Christmas Valley to Tillamook dairy customers. Using 90's Freightliner wrecks, single axle, light weight, Series 50 4cyls and a 7 speed, full air ride, 8 lug axles with disc brakes. First was a 1956 Kenworth log truck, the 2nd was a '60 Freightliner cabover retired consolidated tractor. We have also built 2 sets of aluminium hay doubles. We run all low profile super singles on aluminium wheels. This years project is a '62 Peterbuilt, next year will be another set of trailers and finish up the interior. That will be my last big truck. I have street rodded a '52 Chevy pickup, built a '56 Chevy Cameo from a pickup cab with shortened quarter panels from a '56 sedan. Chopped the cab 3" and channeled the cab to match quarter panel height. I built a '28 ford track roadster on coilovers. A '52 Chevy cabover "pickup", dropped the cab on a pickup frame, matched the upper front cabover fenders and hood to the firewall and welded in pickup wheel wells. Welded the front section into a forward tilting hood. and raised the grill. Formed my own bed from 16 ga. sheets and trailer fenders....James
 
I don't know what set up I am on. I just put the link from logo at the top of the page in my Bookmarks, hit latest posts and scroll through the first 2-3 pages, when/IF I do come on. I figure a day or 2 is old enough to rely to. Sometimes if I have internet I will check older posts. This is my new "farm" forum. I am too many years from farming now for Ag Talk. I am more interested in building old cars and pickups. I like smaller, older rigs that I can put Mustang II front suspension, S-10 Iron duke engine and aluminium power glide in. Manual rack and pinion and brakes, elect fan and 12v water pump to keep parasite power loss to a minimum .

8 years ago now, I rebuilt a Chevy curbmaster motorhome, original frame, S-10 running gear. 6 years ago I built an RV from the cab of a 1936 IHC cabover truck. Front wheel drive from a Cavalier and beefed up Cavalier rear axle, 8' aluminum U-haul box from a Datsun moving van with a very light interior. 3 years ago I took a 1976 short Chevy van, installed an Iron duke 4 cyl and running gear from an S-10. 4'wide bed across the rear with chuck wagon style kitchen under the bed, out back. It is what we use for an RV now.

The last couple years my Son and I have built a couple truck/tractors to haul hay from the ranch in Christmas Valley to Tillamook dairy customers. Using 90's Freightliner wrecks, single axle, light weight, Series 50 4cyls and a 7 speed, full air ride, 8 lug axles with disc brakes. First was a 1956 Kenworth log truck, the 2nd was a '60 Freightliner cabover retired consolidated tractor. We have also built 2 sets of aluminium hay doubles. We run all low profile super singles on aluminium wheels. This years project is a '62 Peterbuilt, next year will be another set of trailers and finish up the interior. That will be my last big truck. I have street rodded a '52 Chevy pickup, built a '56 Chevy Cameo from a pickup cab with shortened quarter panels from a '56 sedan. Chopped the cab 3" and channeled the cab to match quarter panel height. I built a '28 ford track roadster on coilovers. A '52 Chevy cabover "pickup", dropped the cab on a pickup frame, matched the upper front cabover fenders and hood to the firewall and welded in pickup wheel wells. Welded the front section into a forward tilting hood. and raised the grill. Formed my own bed from 16 ga. sheets and trailer fenders....James


That sounds like a bunch of cool stuff.

A thread with pictures of them would be good.

Community Features would probably be a good place for it.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top