S/C BOB

Member
I got a turn plow today hoping to use it with my MTD Fourteen Hundred. I don t have any experience on pull type tools and how they hook up. Any pictures of some hitches will help.I d like to go to a plow day sometime. I m in N/E Tenn. and thinking of the Athens plow day. Thanks
 
Does the MTD have ground engaging implements available? If so, there should be a hitch available. If no, then you may want to think twice about using it for this purpose. I assume that the plow is 3pt hitch. If ground engaging attachments are not offered for a yard tractor, even if it has sufficient power, most of the time the frame and transaxle are not heavy enough. Just some thoughts. STR.
 
My Ward's tractor use's the sleeve hitch for implements. I had to build this frame as the plow is off a Viking garden tractor. Hal
a60174.jpg

a60175.jpg
 
Yep tha'ts a sleeve hitch very simple to connect to and use and lots of implements available. Here's another pic of a sleeve hitch:
HPIM1057.jpg

GB in MN
 
I will have to do some fabricating just trying to see the difference in the sears and my mtd hitch so I can rig it up as I do have welders and a torch ..Thanks
 
Yes it is like the one you posted I will need to alter it to connect it to my tractor and I was looking for some ideas. As mine does have the sleeve hitch and seems my plow s beam is kinda long.Or does that matter much.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top