Stationary Motor ID ?

[68377]

Have a need for a small Hp engine now & in back of shed saved some Oliver Diesel stationary motors from the scrap yard. Couple, 3 of these were irrigation motors I believe. Yellow one from factory.
Engine I picked turned over some then stopped, need to tear down & check out why.
Unable to find a plate/badge on the motor I pulled out, but it does have the #195245B stamped on front of timing cover.
I'm thinking it might be maybe a 188 maybe ?? 265 cubic inch ?? Grandfather had one on irrigation well 40 years ago similar if I remember correctly.
Any where I can look ??

Thanks

 

[rustyplow]

the filters and location of the oil fill say it's a 199. Should be 302 ci

 

[J. Schwiebert]

Indeed it is either a 199 or a Super 199 power unit. As was mentioned it is 302 cubic inch displacement. About a week ago there was a man on here looking for one. I will send you an e-mail, let me know if you receive it.

 

[hrRoss]

its a I99, as seen by the long bolt- on plate on the injector side of the block