styled wc

[Anonymous-0]

I have a styled wc that has a stuck engine,i filled it up with auto trans fluid and kerosene.when i open the block drain plug,the stuff i poured in the spark plug holes runs out.what would cause that? i have not taken the head off yet.looks like thats the next step.thanks jim .

 

[old]

Sounds like at one point in time on of if not a few of the cylinders where full of water and that water in turn froze and cracked one or more of the sleeves. One like that is a rebuild or part out machine

 

[David Maddux]

Jim: From my experience, usually when a motor sticks, not all pistons are stuck. Usually the ones that have the valves open. Probably the cylinders that are free, have drained your mix. Dave.

 

[old]

From what I read of his post he opened the block drain which means coolant drain not oil pan drain so it has to have a cracked block or sleeve for it to get into the cooling system

 

[jdvswmo]

Your best bet is to take the head off. I agree with David you probably only have one maybe two pistons stuck.