Super M Power steering

[Zac Martin]

The neighbor down the road has an H with power steering and live hydraulics. I was wondering if all of the parts would transfer from the H over to the Super M. Also should I buy the P.S. bracket from steiner tractor and mount a diffrent pump or is there a way to plumb the pump so it can run the SCV and the powering steering motor.

Thanks for the help.

Zac

 

[Russell Grieff]

does your super m have live hyd

 

[Zac Martin]

no it does not have live hydraulics and it is an early super m with the battery under the gas tank

 

[IH fan]

I don't know if the live pump from his H will fit the SM, but with a live pump, you could use a "priority flow divider valve" to supply both. The dis-advantage I see with my tractor is when idled down, you still have steering, but you can lose your secondary flow to the SCV.

 

[Zac Martin]

Does the distributor drive the same way on the Super M as it does on the H or are the timing gears different? I thought that the live pump was the same between all of the tractors.

Thanks again
Zac

 

[dej(Jed)]

(quoted from post at 12:39:59 03/02/12) Does the distributor drive the same way on the Super M as it does on the H or are the timing gears different? I thought that the live pump was the same between all of the tractors.

Thanks again
Zac

It is all the same. The diesels drow the oposite direction.

 

[Anonymous-0]

Super H & 300/350 gas was a specific pump, mtg gasket was different shape, 350 diesel was specific, Farmall & International (utility) were not different but engine specific. M/SM/400/450 were same (gas M you just filed the mount holes slightly), gas & diesel wont interchange.

 

[sflem849]

Different. Buy the H stuff cheap and sell it. Then you can use the profit to buy the one you need.

 

[Russell Grieff]

if the pump off the h is a m&w pump it will work on your m