Superior Loader

[Lwharness]

Just got a fairly decent superior loader for my 851. Had to build a gantry to pick it up and get over/on the tractor. I have the rear brackets and pins in place, wondering about the front. The bottom of the loader has a plate with 3 holes and I have to hanging brackets that came with the loader. From where this lines up it looks like I have to drill a couple of holes in the front bolster. Does anyone have one of these on a tractor they could take a picture of or otherwise advise me. Thanks.

 

[Belcain]

I have a Superior loader on my 850. Real hard to get any info on those things. I'll take a couple pics if you still need them. I'll have to wait for this darn rain in NH to go away though.

 

[Anonymous-0]

I have a superior loader, I removed it from a Jubilee and there were bolt holes already in the "bolster". There are two holes that you bole the brackets and the loader hangs from them. I removed the loader from a Jubilee and mounted it on a 3 cylinder 2000. The middle larger hole is for the front pump that bolts to your crankshaft. My tractor is at the my cabin I will be going up there next week if you don't get any pics from anyone else let me know and I will take some.

 

[Shetland Sheepdog]

Belcain,
Got a Superior loader on an 8N over in Hollis! Doubt I could get a decent picture, as it's been buried back in the barn cellar for 20 years or more! I'll tell you that the Superior loader is twice as much loader as that tractor should be carrying! It will prolly keep your 850 as busy as it wants to be!
JMHO, Dave
PS: You must know Showcrop!

 

[Belcain]

Are you just saving that 8N for a project, waiting for it to get bad enough to fix?
Yeah - the loader is good now, I had to have the lift cylinders rebuilt because it would not even lift a light load of anything. I like the 850 a lot. She's not pretty but she works well.

Sadly I don't know Showcrop. He's in NH as well?
I'm over in Chester sort of between Raymond and Derry.
It would be nice to have some contacts at least in the state.

Cheers

 

[Shetland Sheepdog]

Yes, The 8N is a project for my brother! He has about forty-eleven projects ahead of him, and I suspect that the 8N is kinda far down the list. The lift cylinders were okay on the loader when we "stored" it, but we had the bucket cylinders rebuilt!
As for Showcrop, he resides in Chester!
You can ping me if you wish - DnseAgeratMyfairPointdotNet, Dave