Thread sealer

Rich'sToys

Well-known Member
Location
Southern MN
What do you guys use for thread sealer on fuel line related stuff, like replacing a sediment bowl in the tank, or adding an in-line shut off valve, etc.? I've had mixed results with teflon tape and other sealing products. The last couple times I used Permatex Hi-Tack gasket cement. It's rated as gasoline resistant and is rather thick and so I used that. So far it seems to be working.
Just wondering what everyone else uses.
 
There is one called Harvey's thread sealant, it used in high pressure natural gas line's fittings, and compatible with all gas and oil, it says on bottle, used it for about 6-7 years, but i admit before i had seen it in the hardware store, i had never heard of it !!!
 
Home depot sells a yellow teflon type
tape and a yellow tube of thread sealer.
Both on the plumbing isle and both work
great. Both say for gasoline. Picture in
a bit......gotta get a cup of coffee and
walk to the barn
 
I have never had a problem with teflon
tape,so that is what I use.Just be sure
and wrap the tape in the opposite
direction of the threads.

Rock
 
FR ..... I always have to stop and think about that every time I do it. Then think about which end of the connection I am thinking from as I wrap the male end ..... viewing from the male end or the female end. I have read somewhere that for gasoline, oil, natural gas, etc. and other petroleum connections, a person should use yellow-colored teflon tape. I have seen it but not very often and have never had any or used it.
 
I don't think High Tack is intended as a thread sealant. As for Teflon tape, it's worth noting that the FAA doesn't allow its use on aircraft due to the risk of a bit of tape plugging an orifice somewhere.

I generally use one of the pipe dope products that have Teflon in them, and I've had good luck with those. If I have a particularly troublesome pipe thread, such as certain made-in-China fittings, I'll use Teflon tape plus pipe dope.
 
Lowes here sells Blue Monster sealer which works on almost everything including gasoline and even steam pipes.
Been using it for several years on everything I plumb.
And it does not harden enough to prevent you from taking it back apart years later.
Richard n NW SC
 
thread sealant designated for natural gas; some call it pink, some call it yellow, in colour. What ever the colour the designatin is the factor. " natural gas". It is thicker, stronger, better suited for oil & gas. Both the tape and the paste work well; I have and use both depending on what I am doing.
Wm.
 
(quoted from post at 22:12:52 11/28/20) What do you guys use for thread sealer on fuel line related stuff, like replacing a sediment bowl in the tank, or adding an in-line shut off valve, etc.? I've had mixed results with teflon tape and other sealing products. The last couple times I used Permatex Hi-Tack gasket cement. It's rated as gasoline resistant and is rather thick and so I used that. So far it seems to be working.
Just wondering what everyone else uses.

Leak Lock works well for me.

https://www.blueridgecompany.com/radiant/hydronic/742/leak-lock-joint-sealing-compound
 
I use the yellow Teflon tape. Works great. To the point below,
of not wanting any debris in the line, I tend to wrap the
threads a bit back from the leading threads.
 
(quoted from post at 22:12:52 11/28/20) What do you guys use for thread sealer on fuel line related stuff, like replacing a sediment bowl in the tank, or adding an in-line shut off valve, etc.? I've had mixed results with teflon tape and other sealing products. The last couple times I used Permatex Hi-Tack gasket cement. It's rated as gasoline resistant and is rather thick and so I used that. So far it seems to be working.
Just wondering what everyone else uses.

Rectorseal
 
Permatex # 1 or # 2 The hardening type ( forget which # ) is good for fuel bowls where it is too loose
where you want it and too tight to get another turn on it.
 

cvphoto65052.jpg

Untitled URL Link
 
I have worried about it disintegrating into the lines of whatever I'm working on,but I am careful to wrap the teflon tape opposite of the threads,and far enough up that it won't fall in the lines.However,I would be interested in some of this yellow teflon tape you mention.I am always open to better products,but I just never took the time to look into it,other then what I was taught growing up,so I might have to buy some of that.

Rock
 
FR .... this below is from a discussion forum on a web search .... sounds like the color is marker as to the product's thickness in some cases and it's actual chemical makeup in others. At least from what this says ....



"The colors mean something, but the meaning has changed over the years so some info may be old. The CURRENT standard is:

White = single density tape and is ONLY good for small fittings up to 3/8 in. pipe. Most people are unaware of this. "Double Density" tape used to come in white as well, but because that could be used for larger pipes, it was impossible for inspectors to know if the white tape used on 1/2" and larger pipe was in fact double density, so they stopped making it.

Yellow = double density, required for natural gas (methane) piping 1/2" to 2" dia. pipe. In many jurisdictions you MUST use double density tape on gas piping, so inspectors will look for yellow.

Pink = triple density, required for NPT threads 1/2" to 2". Again, most people are unaware of this change and hardware stores rarely sell it for the DIY market, but if you are going to get an inspection, this is what you must use now. This is also good for gasoline and propane lines.

There is also green for medical gasses (oil free tape) and gray / silver for use with stainless steel and aluminum pipe (has anti-seizing compounds embedded in the tape).

Over 2" you must use sealing compounds."
 
Crazy Horse-I honestly never knew any of this,so this definetly makes me want to go out and buy some yellow teflon tape.I really appreciate you taking the time share this with me.I learn something new every day.Thank you!

Rock
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top