Throw out bearing

[Robert-b]

Good afternoon
Looking for information on a throw out bearing for a 1969 ford 4400 with the 4x4 manual reverse transmission. (G code) . I've attached pictures with caliper for measurements.

Also have my local bearing company looking without any luck. And yesterday's tractor can locate throughout bearing carrier, but not the throw out bearing

Thanks

 

[wore out]

Good afternoon
Looking for information on a throw out bearing for a 1969 ford 4400 with the 4x4 manual reverse transmission. (G code) . I've attached pictures with caliper for measurements.

Also have my local bearing company looking without any luck. And yesterday's tractor can locate throughout bearing carrier, but not the throw out bearing

Thanks

Any part numbers on the bearing itself?

 

[stevieb49829]

I know you are concentrating on a throwout bearing, but that looks like a typical thrust bearing, with pretty standard dimensions. Go look at McMaster Carr, and other bearing sources for a Thrust Bearing that meets your dimensions. Or find some numbers to look for a NOS throwout bearing on eBay or elsewhere. The OD isn't even very important, just the height, and the ID. steve

 

[Robert-b]

Any part numbers on the bearing itself?

No Parts number but etched FoMoCO (ford motor company)

 

[Robert-b]

I know you are concentrating on a throwout bearing, but that looks like a typical thrust bearing, with pretty standard dimensions. Go look at McMaster Carr, and other bearing sources for a Thrust Bearing that meets your dimensions. Or find some numbers to look for a NOS throwout bearing on eBay or elsewhere. The OD isn't even very important, just the height, and the ID. steve

Went to my local place yesterday afternoon Maguire Bearing. They checked around and just called back today with no luck locating one.

 

[wore out]

Good afternoon
Looking for information on a throw out bearing for a 1969 ford 4400 with the 4x4 manual reverse transmission. (G code) . I've attached pictures with caliper for measurements.

Also have my local bearing company looking without any luck. And yesterday's tractor can locate throughout bearing carrier, but not the throw out bearing

Thanks

Can you find something by dimension in the chart above?

 

[wore out]

View attachment 64693

View attachment 64694
Can you find something by dimension in the chart above?

 

[Robert-b]

I'm probably going to machine a top hat bushing/sleeve this weekend in the shop, to the bearing size that was sent with the new clutch kit.

 

[used red MN]

From the parts book it looks like C7NN7548M is the PN of what you need. But that is both the support and bearing, it can be yours from CNHI/Fiat for the small price of $1764, or the economy version for $1562!!
CNHI Ford 4400 parts diagram

 

[Robert-b]

From the parts book it looks like C7NN7548M is the PN of what you need. But that is both the support and bearing, it can be yours from CNHI/Fiat for the small price of $1764, or the economy version for $1562!!
CNHI Ford 4400 parts diagram

wondering if it's made from unatamining / that's just crazy

Thanks

 

[NIK OWEN]

Good afternoon
Looking for information on a throw out bearing for a 1969 ford 4400 with the 4x4 manual reverse transmission. (G code) . I've attached pictures with caliper for measurements.

Also have my local bearing company looking without any luck. And yesterday's tractor can locate throughout bearing carrier, but not the throw out bearing

Thanks

8002316876, ALEXANDER'S...BE BLESSED, GRATEFUL, PREPARED...

 

[Robert-b]

Update on how I fixed the problem step bushing with measurements in the pics