ronztractor
Member
Need some help with a 1220 ford .
I have poor compression on #1 and 3 cyls number two will make smoke but the other two won't.
I pulled the head and had it gone over at the machine shop put it together with same results.
I switched injectors with same results,the pistons seem tight in there bores.i pulled the timing cover to ck the timing it seems unlikely but have
to ck.
The Manuel shows how to set the gears up but no mater how many times I turn it over it never lines up.
Is it different for a 3 cyl .?
Any help would be great thanks
I have poor compression on #1 and 3 cyls number two will make smoke but the other two won't.
I pulled the head and had it gone over at the machine shop put it together with same results.
I switched injectors with same results,the pistons seem tight in there bores.i pulled the timing cover to ck the timing it seems unlikely but have
to ck.
The Manuel shows how to set the gears up but no mater how many times I turn it over it never lines up.
Is it different for a 3 cyl .?
Any help would be great thanks