timothy problem in alfalfa

Anonymous-0

Well-known Member
My alfalfa field is going on it's fifth year, and starting to get a tad thin in spots. For the last 3 years, I've been seeding about 2 lbs of timothy when I fertilize the alfalfa.
Problem is that I don't see any timothy except in wet spots or field edges. I figure that the timothy just can't get up through the alfalfa in the better parts of the field. Wondering if I'd have more luck with orchard grass. What do you think? Also, when cutting alfalfa 3-4 times a season, how long will the timothy plants survive?
Thanx, Larry NE IL

 
Timothy is slow to establish(compared to Orchard) and doesn't like to be cut 4 times a year.

I would switch to orchard...(I did)... I had a real nice mixed Tim/Alf field. COuple years later, generally all alfalfa.... That field got 4 cuttings a year.....
 
I use timothy in alfalfa, with good success. First cutting you get lots of nice showey timothy, then clean alfalfa.

Whats worked for me is to fall see the timothy at 10 pounds per acre notil into the spring seeded alfalfa, or drill them both at the same rate in the fall. Then, in the 3rd, 4th year I overseed the timothy again notil if it needs it. Main thing I do different is to take the first cutting either in April or after the timothy is heading to get the show. Fields I dont cant cut this early or dont want to wait that late on I use orchard grass.

Biggest problem I've seen in established alfafa is the shallow rooted timothy cant get established in dry weather.
 
It is a real common problem with Timothy, I don't know why. Orchardgrass is a lot more vigourous, but is also very invasive. Grass like annual ryegrass will fill in the thin spots, seeds easy, and does not crowd out alfalfa, and it is a better quality grass than orchardgrass.
 
Thanx for the info and ideas, they are appreciated! I've been topseeding 2 lbs/acre of timothy. That's probably my problem, being abut 8 lbs short!
I'll give it another try before the frost is out of the ground this spring using 10-12 lbs/acre.
Thanks, Larry
 
thats the spirit. If two pounds does not work I am sure that 10 pounds is all ya need to fix your problems?
 
In the old days here in western Oregon,40s-50s we would take a springtooth with narrow teeth called alfalfa teeth and run at 2 angles across field in the fall after a good rain. This loosened some soil but more importantly broke down the crowns to reinvigorate the alfalfa. Alfalfa builds up crowns as it gets older and cuts down on # of stems from each plant. This works for clovers and lotus also. This also breaks up the mat that grasses tend to build up,that causes competition to the alfalfa plants. Here we didn't want the grass to compete and kill out the alfalfa in young stands.In old stands this was a good time to reseed in the loosened soil, we usualy planted orchard grass in old stands of alfalfa or clover with a double disk grain drill with sprocket roller to set seed, then let it take over for hay and pasture for several years. This would let grass establish and still get good crop that year.I did this up into the 90s although it wasn't standard practice, but it worked well. I think it was too costly for large operations. All I had in it was fuel and an old 12' springtooth behind a Farmall H
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top