TO30 oil filter

[Dave in DSM]

Went to Tractor Supply to get an oil filter for the TO30. It listed a Fram C134PL oil filter. Has anyone used this filter?

 

[Richard L]

NAPA Gold 1010 works in the TO 30. I have not used the fram.

 

[SARG]

I've done a ton of reading lately and it all pointed to Fram being the bottom of the pile....... something about the filter material being glued to cardboard ends that tend to degrade over time & usage.

The Purolator Pure One was rated as one of the best because the filter ingredient consists of three types of materials where most just use paper type "stuffing".

I use them on all our vehicles ........... Just got a case of them for my tractor from Amazon.

 

[Bill in Brunswick]

I had been using the Fram C134PL oil filter too for my TO30, but later saw a post on this site that the proper Fram filter should be the C3P. It does look like a better fit and I've been using it ever since. As far as what manufacturer is best, I have no idea, so you might want to go with sarg's suggestion.
Have a Merry Christmas!

 

[Anonymous-0]

any filter the book shows will be fine.

 

[Dave in DSM]

Fram filters do tend to get knocked on a couple of vehicle forums I belong to however I"ve had no issues with them on any of my vehicles all of which have gone over 100K. For the average user I think oil filters are like asking a guy what his favorite beer is. Ask ten guys, you"ll get 10 different favorite beers - mines Budweiser by the way....
I couldn"t find a Ferguson TO30 listed in the store oil filter reference manual. It instead referenced the "Massey Ferguson 30" which listed the C134PL as the proper filter. Wanted to know if this was the same filter to use on the TO30.

 

[rusty nut]

fram C3P is the right one.

 

[DonBan]

NAPA Gold 1010 is the one I"ve been using too. I"ve had good luck with it.