Toolbox Drawer Liner

Fawteen

Well-known Member
Location
Downeast Maine
Can anybody recommend a source for drawer liners that actually stay in place and don't get all bunched up at the back of the drawer every time you close it?

I've tried three types: The stiff solid sheet, the soft solid sheet and the really soft waffle stuff. NONE of 'em work worth a tinker's damn.

I don't overload my drawers, one layer of wrenches/screwdrivers/sockets/whatever in each. I've even tried double-sided tape under the liner and still can't get them to stay in place.
 
Shag carpet? kinda necky, but should do the trick. May even end up getting a discount on some nice curtains for the pickup too :roll:

Dave
 
Went up to Lowe's and looked at those spiffy new stainless steel tool boxes. These had nice closed cell type foam drawer inserts. Got to thinking why do those drawers need a liner? why do those tools need a bed? We had 30 and 40 year old wrenches thrown in tractor tool boxes on the farm 30 years ago along with all the crud that accumulates and they worked just as well as any new wrench off the shelf at the local NAPA. SOooo..I went over to Wally World and bought a 4" memory foam liner for the most important tool box on the place. My bed.
 
Well, I know what I use, but it probably isn't gonna do you a lot of good--I've got a dozen big rolls of material left over from a gasket job we did involving making door gaskets for indoor/outdoor forklifts. It's a closed-cell foam blend with majorly sticky PSA on the back. Sticks down, stays there, and takes a reasonable licking.
 
Had some left over brown outdoor carpet from open porch, snow and everything else on it, 2 sided tape full length of carpet, front, back and middle, no problems yet, 6 months...
 
Just did a new box 2 large 1 small roll shelf liner for kitchen cabinets its like a cushion pad type at Walmart 1 can of spray adhesive all under $20 This did top and bottom cabinet
 
Don't know what you have for boxes. All mine are Craftsman 26" goods, 12" deep boxes stacked on 18" deep carts. I sprung for their high-tack liners and they work quite well and stay put whether it's the drawer with the 3/8" drive stuff, the 3/4" drive goods, or the screwdriver or the pliers drawers. They come precut at 22 and change wide for 26" boxes -- #95568 is 14-3/8" deep (needs to be trimmed for 12" deep drawers). #95569 is 16-3/8" deep for the drawers in the carts. If the size works for you, I'd say they'd be worth a look.
 
I used spray on rubber undercoating from the parts store. Did the sides of the drawers as well as the bottoms. Extra coats on the bottoms with drying time in between.

Been two years and it hasn't come loose or chipped anywhere.
 
I got some "stair runner" material - the old vinyl floor material that is tacked down on stairs. It is about the right thickness, is soft, lies flat, and is cheap. Works great.
 
Over at the vocational school, the Craftsman tool boxes have a liner of about 1/4" stiff foam, with cut-outs in the shape of the tools that go there. The foam is glued to the drawer bottoms. So each wrench, screwdriver, rachet, and socket has its place. I'm sure the purpose there is to tell whenever anything's missing, as much as to keep the tools organized.
 
The best I"ve ever had were the expensive Snap-On liners that come in their KRL series boxes. When new, they"re tacky on both sides, keep your tools in place and the liners don"t slide on the drawers. I"ve never tried the tacky Craftsmen ones that ScottyHOMEy mentioned, but sound like they"re a similar product.
 
Funny you should mention that. My brother has liners in his tool boxes. Nice stuff. I commented on how nice his liners are. He says it's shelf/drawer liner. He bought it over to Dollar General. I liked it so much, I went to Dollar General and bought 6 or 8 rolls, at $2.00 per roll. This just happened. I don't even have it installed yet.
 
The ones I have in my boxes are from Lowe's. Seems that they don't "slip and slide" too bad and they don't cost too much. I saw the stuff at Sears, and they look almost the same as what they sell at Lowe's by the roll (like I bought) and cost a lot more.
 
Yeah, me too. I just cut up corrugated cardboard from boxes. They provide cushioning, if you cut them tight they stay put, and the price is right. Has worked fine for years.
 
(quoted from post at 13:57:09 02/01/09) I got some "stair runner" material - the old vinyl floor material that is tacked down on stairs. It is about the right thickness, is soft, lies flat, and is cheap. Works great.

X2 ..... and it comes in great long rolls so you can cut it to the exact size for each drawer.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top