torque specs and valve lash

[HSD]

what are the torque specs for an 88 gas headbolts? also wondering what to set valve lash at, thanks.

 

[WI Walkin Boss]

85 on head bolts .10-.12 on the valves (cold)

 

[Anonymous-0]

Torque on head bolts is 96-100 foot pounds. Valve lash is 01-012 on the intakes and 15-71 on the exhaust.Both settings are for valves cold or at room temperature. If you installed a new head gasket warm it up for a 1/2 hour at operating temperature, retorque it and reset the valves.