Tractor is Missing

[Allan in NE]

Seems to only affect the front four cylinders tho. :>)

Allan

 

[glennster]

kinda looks like the front half of a 2+2 hangin there!!!

 

[Hound]

I'm glad to see..... no cement blocks....

Hound

 

[Allan in NE]

Yeah,

Didn't wanna take a chance on getting chewed out again. We all know how dangerous those things are. :>)

Sure hope that goofy thing is still in the air when I go out there tomorrow. :>(

Allan

 

[Dave from MN]

Alright, kinda out of the loop on this project. What ya have going there?

 

[ArleninOr]

Allen, we told ya to change the tires not the whole front or is this a simple divorce?

 

[rednekelmo]

well if you stop posting suddenly we'll have an idea why (evil laugh here). it's to cold to be outside laying on the groung doing that kind of work if you don't have to

 

[Hound]

If you were closer I would of traded you front ends. I have a M with a narrow front. Your gearing this up for a "raker" tractor, aren't you? Man...if you get any more tractors, your going to forget what its like to unhook equipment and pull draw pins.
keep at it.
Hound

 

[Allan in NE]

Keep tellin' ya, when the wind blows out here, IT BLOWS! :>)

Just swappin' out front ends.

Feller in Kansas wanted that original wide and I want a set of 6-bolt 9.5Lx15s and some power steering.

Playin' in the snow, mostly. :>)

Allan

 

[Allan in NE]

Don't tell the wife. I've already ran out of hitchpins. :>(

Allan

 

[Allan in NE]

Yeah,

Took me a whole hour to get that sucker off of there. Had to have been a factory installation in '52.

Every blessed bolt fought me to the finish. Gotta remember to put the ol' sow back togther one of these days, I 'spose. :>)

Allan

 

[OliverGuy]

I agree on the 2+2. Hang another M on the front and go for it. Dad used to run one when he was younger. Probably pulled more than anything else around back then.

 

[Ken L]

You really don't have to go through all that work just to change the anti-freeze.

 

[Aaron Ford]

Them's some good brakes ya got there...

LOL

Mine looked like that once. The rest of the tractor was in a second pile. All together now, though...

Aaron

 

[Walt Davies]

I sure hope you put some proper cribbing under that front end before working under there I would like to see you get at least as old as I am.
Walt

 

[Anonymous-0]

Just how fast were you going when you clobbered the brakes on that M ???

Looks like 90% of 'er'll stop on a dime!

 

[rustyfarmall]

Hang enough weight on the drawbar and you can get rid of that jack and the blocks.

 

[Anonymous-0]

Marvelous idea. A segway on steroids! And a Farmall to boot. You've done it again Allan! Better hurry up and get down to the patent office before someone steals your idea. Dave

 

[Anonymous-0]

WOW,,,Double WOW

 

[Andy Motteberg]

Why did you remove the front end? Did it fall off from the long drive back home?

 

[Jim.UT]

It's been a few weeks since I checked your progress here. I hadn't heard you finished the Gleaner project and had moved on to something else. Congratulations!

I'll go back a page or two for the finished photos of the Gleaner.

 

[Indiana Boy]

Wow!!! Those are some meats on the front of that-- Is that a prototype IH front wheel assist? HAHA!

 

[wijim]

Hope ya got the brakes set

 

[Janicholson]

I inspected it for essence of cinderblock and found none. Goooood work Jim
I kinda liked the way it looked with the Snows on it. Reminded me of a set of GripSpur tires I got in Amarillo,TX. Jim