Tractor manuals on CD: computer question

atlarge54

Member
Location
NE Indiana
I've got a tractor manual on CD which is read using Adobe. When I go to full view so the print and drawings are easier to read I can't seem to exit or do anything else. I just turn off the computer and restart. Gotta be a better way.
 
Have you tried using the "+" button to make the drawings bigger without switching to the fullscreen version (the "-" button will them make then smaller again).

What happens when you print the drawings... can you make them fill the page... that might be the easiest and clearest solution?
 
Have you tried Alt-F4? That usually closes the current window. Or try F-11. Many programs use that button to toggle between full screen and viewing in a window mode.

Hope this helps.
 
Last night I printed quite a few pages and on the 50% setting they came out great, filling the entire page. I was printing from the normal view not the full page.
 
One way to exit a window and close a program that is not responding is to open the Task Manager.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/?action=view&current=TaskManager.jpg" target="_blank">
TaskManager.jpg" width="300" height="400" border="0" alt="Photobucket
</a>



To open the Task Manager; press and hold the [b:654c4848f0]CTRL[/b:654c4848f0], [b:654c4848f0]ALT[/b:654c4848f0], and [b:654c4848f0]DELETE[/b:654c4848f0] keys simultaneously.

With the Task Manager open, select the program that is not responding and click the <a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/?action=view&current=EndTask.jpg" target="_blank">
EndTask.jpg" border="0" alt="Photobucket
</a> [b:654c4848f0]End Task[/b:654c4848f0] button.

Hope this helps.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top