VAC Case plow

[Dennis Madison]

I have a VAC tractor and would like to come up with a mounted plow for it. It doesn't have the eagle hitch. The early VAC's had a mounted plow before the eagle hitch. Any ideas would be appreciated

 

[George1048]

There was one for sale on ebay a few months ago, but it wasn't all there. That is probably going to be your biggest problem, as there were quite a few hitch parts that bolted to the tractor and got left on when the plow was removed and eventually separated from the plow. You might have better luck finding a pull type of the proper era. I have a complete VCMB plow if you would like pictures of the complete hitch setup.

 

[Anonymous-0]

I have the 2/12 plows , BUT I dont have all the Hardware ,,,, Bought VAC plow and dearborn Mower at auction , i knew then i did not have all parts ,, but hoped to find them,,.

 

[Anonymous-0]

I have one and will try to take pictures if anyone is interested and it stops raining this weekend. I am not selling as I have two VACs to restore.

 

[George1048]

Aside from the two hand levers for depth control and leveling, a good machine shop could probably fabricate most of the parts needed. But with today's prices for steel and labor the cost would be undoubtedly prohibitive!

 

[Dennis Madison]

We have all the hardware, we just need the plow.
Anyway we could get together. Where are you from,I am from northern Wisconsin.

 

[George1048]

I am in west central Illinois, but mine is not for sale. My father purchased the VAC, plow, and cultivators new in 1948, and I wouldn't part with it for anything.... too many good memories! You're welcome to come see it if you want to.

 

[cskent]

I have one it is a 2 bottom vcmb it is for sale, and I know of another one for parts, I am in north central Ohio. Send me a phone number if your interested. Thanks