Wanted 9N reverse idler gear

[Sean (TX)]

Also need part # 26. Idle gear is part #24

 

[Sean (TX)]

Just pulled the old pin to see it for myself. Someone pulled the pin....The common mistake...I thought it was to check the fluid level

Couldnt get it back in and cut it off with a hack saw

Then put the pin back in... I have at this tractor since june of 2006. Took the pin a while to work its way out of the gear...

Hard to see but this is what is left of the pin.

 

[TheOldHokie]

Sean,

If you cant find one give me yell. Looks pretty simple - I can likely make you one if I you can get me decent dimensions. If not I might be able to pull the one in my 9N - how hard is it to get back in if you have the ccver off?

TOH

 

[Sean (TX)]

John Smith has a pin. Have not heard back from him, Sent him email. Still looking for a good used gear. Its a NLA pin and gear. When I get one I can send you the old cut off one and the right length. Be good enfo to keep on hand. Ill bet this is not the first time this has happenend!!

Pulling yours out would be easy. The hard part is getting it back in. (DONT DO IT!!!) If that gear or pin moves at all you cant get the pin back in.. You cant get at it from the top. You will have to split your tractor in 3. Not a easy project. That gear and shaft is on the bottom of the transmission. That bolt in pin is on the out side of the transsmission. People have posted here before and made the mistake of pulling the pin and wondering how to get it back in. Some think it is how you check the tranny oil level...NOT

 

[keithr1]

you can try wemgers they have used parts and new
wengers

 

[Dunk]

Not many folks would have owned up to that.

Some high caliber folks here...

I like most all of them!!

 

[John Smith8N]

I've got a good pin right here with your name on it. Email must not be getting through. If you have a way of checking your deleted spam emails take a look in there. I've got the idler gear, too.

 

[Sean (TX)]

Found it in the spam filter John...Put you on the approved sender list.

 

[Sean (TX)]

(quoted from post at 19:26:54 10/02/07) Not many folks would have owned up to that.

Some high caliber folks here...

I like most all of them!!

I didnt cut it most have been the previous owner. I been running it hard for over a year. Took that shaft a while to walk out of the gear...

 

[Sean (TX)]

John Smith had the parts on hand...Problem solved..

 

[TheOldHokie]

Some dufus did a similar thing 15+ years ago to my T-bird - now who could that have been? Cost me $350 to get an emergency reattachment at a local transmission shop.

TOH

 

[Anonymous-0]

Sean
Good luck with your transmission. If you need or want to pour a cement pad to do your tractor work on I have a cement mixer I'll give you. I live in Bergheim Texas which should be fairly close to you. Email me if you want it.

 

[Dunk]

(quoted from post at 20:47:02 10/02/07)

(quoted from post at 19:26:54 10/02/07) Not many folks would have owned up to that.

Some high caliber folks here...

I like most all of them!!

I didnt cut it most have been the previous owner. I been running it hard for over a year. Took that shaft a while to walk out of the gear...

So now you are denying it, and I am gonna have to take all that back?!?!?

I don't think so.

Thank God for John Smith!!

 

[Tex - Driftwood]

i guess you cant order that part online? I wonder if that guy on 32 has one laying around?

 

[Sean (TX)]

(quoted from post at 23:10:18 10/02/07) i guess you cant order that part online? I wonder if that guy on 32 has one laying around?

Those part are NLA. John Smith had everything I needed. Should be in the mail today. Now that I found those parts im going to order the rebuild kit.

 

[GB in MT.]

[b:66a103818c]

So..... Depending on your work load, you may be be starting to put it back together next week-end!!!!????
Man, it's really raining here this A.M.. I guess another day painting for me, Shot in the butt!!
Have a good day SEAN.

Gary :roll: [/b:66a103818c]

 

[Sean (TX)]

(quoted from post at 20:10:33 10/02/07) Sean
Good luck with your transmission. If you need or want to pour a cement pad to do your tractor work on I have a cement mixer I'll give you. I live in Bergheim Texas which should be fairly close to you. Email me if you want it.

Email sent..

 

[Sean (TX)]

(quoted from post at 06:33:08 10/03/07) [b:539ba2cc53]

So..... Depending on your work load, you may be be starting to put it back together next week-end!!!!????
Man, it's really raining here this A.M.. I guess another day painting for me, Shot in the butt!!
Have a good day SEAN.

Gary :roll: [/b:539ba2cc53]

Wont have all the parts till the following weekend. This weekend Im going to drop the pump and clean all the crap out of the belly. To much sludge...Easy cleaning with it split open. So yup... The weekend of the 20th and 21st ill put it back together. Dont complain you need rain up there!!! The fire out yet???

Ill get some more pics before I put it back together...