jd4020puller

New User
Just wondering if I am the only one having trouble with these new wd-40 cans running out of propellant when they are still half full. Tired of taking a screwdriver and punching a hole in them to get the rest of it out.
 
Wd 40 is a joke anyway,Spray some on a cast iron saw table and watch the gum form.A revolver oiled with wd 40 stopped working because of gum deposits.
 
at work we gave up on the aerosols and bought a gallon of liquid and two hand-pumped spray bottles... they never run out of propellant! ...D
 
Yup. The U.S. Navy had WD-40 formulated to disperse water off of ignition systems. That's all it was ever intended to do.

The "WD" stands for "water dispersant" and it was the 40th formula they tested.
 
To directly answer your question, yes, I am always punching and dumping, putting the leftover WD40 into an old oil can to use what's left after the propellant runs out. It seems to be an inherent problem.
 
I use JB 80, costs a little more but it stops rust and lubricates and lasts,If you spray it on rust it foams up and it rust colored
 
The only "petroleum" product in WD-40 is fish oil. It is NOT a lubricant. It is NOT a penetrating oil. It should only be used as a water displacement or a preservative.
It WILL do a good job of loosening up grease and oil. Use it prior to pressure or hand washing.

Gordo
 
Does not contain fish oil, urban myth. It does contain oil so it IS a lubricant. Any thin oil is classified as a penetrating oil so it is also a penetrating oil.
 
I used to sell JB products. I'd go to fairs and other celebrations and put on demonstrations.

I could take a viscosity tester and make WD40 look like tap water compared to JB80.
 
You guys can bad mouth WD 40 all you want. It is a good water dispersant and for me it works for a light penetrate and a light lubricant. I can carry 1 can in our motor home instead of 3. If I need something better I do it when I'm home.

Dusty
 
OK! Just to set the record straight - WD-40 has [u:61deb8f0f8]No[/u:61deb8f0f8] fish oil as stated before. The can contians mostly mineral spirits (paint thinner) which is used as a carrier liquid to distribute the WD-40 formula. WD-40 in it's raw form [u:61deb8f0f8]looks[/u:61deb8f0f8] like soft beef fat and the formuls is known only to about 3 people in the world. No, really, it is a secret formula that is highly garded.

It is a great cleaner becuse of the mineral spirits and has never been promoted as a lubricant because it's not.

It was developed by a privite citizen as part of a govt contract and yes it stands for water displacement formula #40.

Been to the plant. Had a tour. My Brother is a mucky muck there.

FYI :D
 
Hello Goose,
I have a can of wd40 that has paper around the can, remember that far back?
Any who! Do you know how old it maybe. I'm thinking the 70's. I just keep it though.
By the way it still sprays just fine.
Guido.
 
I am pretty sure WD40 has wintergreen oil,
petroleum distillates, and propellant. This
would explain the water dispersing, and maybe
a very light lubricant.
 
Right from their website:

"WD-40 is the ultimate multi-purpose problem solver. WD-40 cleans/degreases, penetrates to loosen up stuck parts, prevents corrosion and is a light lubricant."

But what do they know, they just make the stuff!
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top