WD-40 vrs either

I have a perkins diesel in my truck, no block heater. When I got give it a snort, to start, you better no come up with either, I' hurt you. Use WD-40 it is a lot milder and works real well.

Jack
 
I'm surprised you need starter fluid in Florida, unless your compression in the engine is very low. I rarely use them in Iowa.
 
Well, just read the post; he's snorting something that will hurt you and he uses ether WD-40 or something else. :>)
 
i think he lost a T and ment to say "you better not come up with either" and he's right some small diesels will not take either well it causes tremendus damage, i have to give the ol kw a tiny whif only on extreamly cold mornings, its packing a old 3406b cat, but the new trucks have sensors and heating grids ect in the intakes and either does bad things to those, i wondered what happened with wd 40, i used to use it but latley it doesnt seem to work, i havent tried it to fry flies on the window sills like back in my younger days,[ the windows in the barn did not have cloth curtains , not sure how mom would have reacted if i did that in the house, but im pretty sure it would involve pain and me]
 
nobama, and thurlow first of all I snort nothing, like you and neither on of you don't seem to be able to make a decent reply unless it is a smarta$$ atuidude and the world could do with you.you know nothing about my truck. It has geat comperssion, 54,000 miles since brand new out of crate, the truck I built my self and is a ten wheeler 6x6 F250, So Please swaller, your remarks, and hopefully you choke on them Jack
 
"I've not been able to start anything with wd-40 since they took the propane propellant out of it."


I was wondering the same thing. WD40 is mainly kerosene with CO2 if I recall correctly - not exactly a "starter" fluid when you're already dealing with a diesel engine.

Why are you needing starter fluid in FLA anyway? They have a big freeze the news missed?
 
I gave my lawnmower a 'snort' or ether to get it going this spring after sitting idle all winter and it pinged like craze. I mentioned this to the local mower dealer and he said they always use WD40 and never use ether to spring them to life after a long winter's sleep.Jim
 
A thousand apologies, sahib; we'd love to see a picture of your "brand new out of crate, self-built truck."
 
WOW a 6X6 F-250! Please post a picture. Someone here local built a 6X6 K-3500 about 10 years ago.
Did a beautiful job of it. Sadly for all the astetics, the rear drive train wasn't built tough enough to withstand Pa. roads and this ended up on it's top in a ditch about 50' from where the trailing rear axle took leave.
 
He must have added a tag axle and daul wheels. I saw a Dodge 1 ton cummins set up that way. I never understood why though. I have a 1977 F350 dually and it will handle a 3 ton payload on the bed rather well. Actually a decent load makes it ride rather nice. Empty it rides like a lumber wagon. I've seen a couple of trucks in Wichita that have been converted over to 22.5 truck wheels. Those are kind of neat. I person sure would get a lot of miles out of a set of tires.
 
had a new Sterling when the fuel filter was changed the Sterling tech. came out and said let it run longer next time to get the air out. He then used a pump up sprayer to prime and pressurize the system then sprayed brake cleaner in the intake hose and said it would not void warranty so maybe that is a better choice not sure
 
Roy,
Most all the brake cleaner I use says nonflammable, I think it probably was the propane in it that caused the start. I use propane or MAPP gas from a Bernzomatic.
 
I have read that silicone brake fluid should not be used with vacuum brake boosters as if it gets into the combustion chamber it becomes abrasive silica. Silicone spray lube might do the same thing.
 
I've never had any luck with WD-40 here. It just won't fire in a cold engine. I have used it with some degree of success in dumping it into an engine that has a fuel system in need of bleeding... and it will generally give them enough 'fuel' to get spinning over and start without opening the lines, but it's useless as a cold start aid here.
I've also noticed lately that it doesn't even work/help with bleeding those tough engines.
A good blast of propane from a propane torch will help get them going, but I never tried that for cold starting.
Ether is the only real option here if you need a cold starting aid and don't have a block heater or some type of intake heater installed.

Rod
 
Ever try hairspray? That's what my son used to use in his spud gun. He could blow a potato about 200 feet.
 
(quoted from post at 02:02:36 12/09/08) I don't think I have ever seen nonflammable brake cleaner I'll look next trip to parts store

I have never seen that type either. Sure fires up the old beard if you try to weld something you just got done spraying......
 
It gets pretty cold, relatively speaking, here in North Florida. 26 degrees yesterday morning. My MF175 runs strong, but has always been a hard starter below 45 degrees. I put a little gas on a rag and hold it near the intake. Is this is bad idea? It's what my kinfolk have always done, hasn't damaged anything yet.
 
Most brake and/or parts cleaners remove most oils and leave parts pretty clean (if not real gunked up) so I would worry about them cleaning the cylinder walls dry and causing other problems.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top