wd 45 pto

[George G Smith]

does anyone know if you can turn the pto gear box around to run a front mounted snow blower. Seam like it could be done. Thanks Greg.

 

[Anonymous-0]

I had mine apart reciently. It looked like you could turn the driven gear around on the shaft the housing should bolt on in either direction. The block off plate will fit in either direction.
I was looking at making a shaft with a fwd and rear output. the biggest problem I found was the PTO would be turning the wrong direction to run a snowblower.

 

[George G Smith]

Thanks, I've been thinking about it lately, with all the snow. Greg

 

[Tramway Guy]

Might be possible to build a pto reverser that fit between the torque tube and the pto box...