wd40 headgasket

[Anonymous-0]

have a question im putting a headgasket on a wd40 and wondering if there are seperate firerings ? my gasket just has a hole with no protrusion.

 

[Old Ford Mechanic]

Sure about that model number?

 

[Tom Looney]

Firerings isn't an issue. Double check you have the right gasket and torque to specs.

 

[rustred]

the fire ring is built right in the gskt. tom underwood still had a few gskts. left awhile back.

 

[Ultradog MN]

I wondered about that too. Only WD40 I've seen comes in a can.

 

[Tramway Guy]

International Harvester had a WD-40 model back in the '30's...Start on gas run on Diesel, 4-cylinder.

 

[rustyfarmall]

(quoted from post at 06:11:19 04/18/10) International Harvester had a WD-40 model back in the '30's...Start on gas run on Diesel, 4-cylinder.

Actually, the McCormick WD40 used the 6 cylinder IH truck motor.

 

[olgentdc]

Don't mind them guys , they ain't no worse than any bad day at recess at school with the kids LOL .... Come back with absolute model , cause it sure will make a difference if its a IHC or WD 45 ALIIS,,.. you ain't the 1st guy that called the 45 a wd 40 , neighbor owns one FOR YEARS, and he often refers to a 40 after he's had a few barleypops ...

 

[Owen Aaland]

(quoted from post at 09:35:33 04/18/10)

(quoted from post at 06:11:19 04/18/10) International Harvester had a WD-40 model back in the '30's...Start on gas run on Diesel, 4-cylinder.

Actually, the McCormick WD40 used the 6 cylinder IH truck motor.

Actually, the W40 used a six cylinder engines like the trucks, the WD40 has a 4 cylinder diesel.