What's this part?

KenOlson

New User
While doing the cam gear replacement job I've posted about before, I decided to drop the oil pan and see what might be in the bottom of it. Pan looked good, but I found a half-circle of wire about the diameter of a pencil lead in the clutch side. Looks like it could be some kind of clip. Any ideas what it is and if it's something I need to be concerned about?

Thanks,
Ken
 
If it was in the dry area for the clutch it could be part of a cotter pin that was in the drain hole. Might also be a part of an old bendix drive...


Roger in Michigan
 
Thanks for the reply. Everything seemed to be working OK in the clutch and I'm not real eager to tear that apart right now. Where are you in MI? I live by Exit 59 off I-96.
 
if int he dry area.. I'd think it was a part of a starter bendix.. there are plenty of split rings that hold it together..

soundguy
 
Thanks for the reply. I don't think I'm going to worry about it at this point. If the starter goes bad I'll fix it when it happens.
 
It's probably not from this starter drive.. it's probably from the ghosts of starter drives past.

IE.. it's common to find lots of extra starter drive parts in the bellhousing area...

soundguy
 
Thanks. I just don't like seeing "spare parts" laying in the bottom of castings without knowing what they are! :+)

Ken
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top