(quoted from post at 15:16:00 08/29/16)
i decided to stop off at O'riellys today and get some better points (Borg Warner) than I had previously installed and this is what they sold me.
Am I crazy or will these work on a front mount?
Part number A101P
(quoted from post at 14:37:08 08/29/16) You may need to order them from here or
nnalert's if you can't find a decent set. As
in not plastic. The cheap ones don't last
and it's hard to get them open to .015.
(quoted from post at 18:23:46 08/29/16) In addition to what the other guys said, see if they can cross
the Echlin or BlueStreak numbers if they have a non-plastic set.
Echlin #CS35
Standard Ignition BlueStreak #FD-6769X
You're welcome.(quoted from post at 23:18:15 08/29/16)(quoted from post at 18:23:46 08/29/16) In addition to what the other guys said, see if they can cross
the Echlin or BlueStreak numbers if they have a non-plastic set.
Echlin #CS35
Standard Ignition BlueStreak #FD-6769X
Thank you Royse. I appreciate that info! That will come in quite handy
(quoted from post at 21:12:41 08/29/16) Rick you have mentioned in the past that you like to buy locally, as do I.
You also mentioned that you have a local dealer that sells Tisco parts.
I ordered a set of "Standard BlueStreak" points from a very well
known Tisco dealer once. They came with a plastic rubbing block.
They were obviously NOT the same points I buy at the local, non-Tisco parts place.
I don't know if that's what you got last time or not, but possibly.
(quoted from post at 14:16:00 08/29/16)
i decided to stop off at O'riellys today and get some better points (Borg Warner) than I had previously installed and this is what they sold me.
Am I crazy or will these work on a front mount?
Part number A101P
(quoted from post at 08:46:44 08/30/16) "Dude, get yourself a pertronix unit and go 12 volt and be done with it..............you'll never have to do anything but change the plugs every five years or so ever again........make your life easier"
I still have one hanging on the peg board for a side mount.
A brand new one that Pertronix sent me after mine fell
apart in about a week. Maybe 8 hours run time.
Kudos to Pertronix support, they were great.
They sent this new one right out to replace the failed
one but I still had to wait on it to get here in the mail.
Luckily, I had the old points to put back in.
Those same old points are still in there and running fine.
Maybe when those points fail I'll try putting the EI back in.
Maybe not. I didn't notice any difference in starting or running
with it compared to starting and running with quality points.
At these low RPMs it runs fine either way.
I just relayed the story of mine failing.I have never heard of a Petronix unit failing
I had to replace it, with points, in about a week.once installed you don't ever have to replace it
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy