Yamaha generator EF6600DE

Anonymous-0

Well-known Member
Dear lads
I bought A Yamaha generator EF6600DE about three years ago and never used it much but I always started it once a month with the pull start. Now that I need to use it every day because we are helping a friend build a 30 by 60 shed I can not get the electric start working today I replaced the battery and nothing at all. I then put a set of cables to the starter and it started so what is wrong?
Thank Matt
 
Sounds like either the solenoid or start button, try tapping the solenoid while the start button is pushed in, if that doesnt work try jumping across the posts of the button, a test light would be handy to troubleshoot this problem. but if you dont have one you can just use a jumper wire from the + side of the bat to the small post on the solenoid if that starts it then you got a bad button /keyswitch if not youve got a bad solenoid.
 
DO NOT tap starter as the fields are cramic magnets and will shatter when hit with hammer.
Ibought a tractor with a koler on it that someone had pounded with a hammer had to buy a new starter cost over $100 .
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top