Yanmar YM2020D lever

[kazislovas-HT]

Hello,

My Yanmar YM2020D have two levers at right of the seat.
Bigger (more right) for lift and drop three point hitch.
I dont know reason of smaler lever (more left).
I listen little about flexible top link (or something).

Can somone help or can share with link to read about it.




Thank You

 

[winston-HT]

Assuming you are talking about this lower lever. That is the draft control lever. The Yanmars equipped with it have linkage under the seat area that is made to accept a cable going back to a rotary tiller. Only person I know of that has it hooked up correctly is Mickey Fx. I'll try copying a thread about it. Not sure it will come over. May not be the lever you are talking about? <LINK_TEXT text="http://www.tractor.../105695-auto-tiller-controls.html</LINK_TEXT>

 

[alan-HT]

Most small tractors including Yanmars do not have draft control. Where they do have it, most owners never use it.

It controls the depth of rear implements that dig, usually a plow. If you're interested, an excellent explanation of how it works is on TractorSmart.com under "Tractor Three Point Lift Types."

 

[winston-HT]

<QUOTE author="alan"><s>

</s>Most small tractors including Yanmars do not have draft control. Where they do have it, most owners never use it.

It controls the depth of rear implements that dig, usually a plow. If you're interested, an excellent explanation of how it works is on TractorSmart.com under "Tractor Three Point Lift Types."<e>

/e></QUOTE>
The draft control talked about on "tractorsmart.com" is a different animal than the draft control on Yanmar tractors. The draft control on the Yanmars is strictly controlled by the linkage and cable hookup.