Recent content by Blackstack

  1. B

    CIH 10wt. Low-Ash Oil anyone?

    Has anybody seen any lately? It's for a 450 gas in Minnesoder.
  2. B

    w9 distributor

    All gas start diesels AND the W9, 600 and 650 gas use a mag, distributor and pump that rotates the opposite direction of all the others.
  3. B

    Funny what you find when you remove a little paint on a SM.

    What do you suppose this was? Casting or machining flaw at the factory? It's the right upper forward corner of the rear end housing.
  4. B

    International Model 16 Plow part.

    This is the part that the pull rod pulls on and it lowers the rear tail wheel. 518609 R1. I believe they were also used on the Model 60 and 70 plow. And may be on plows earlier than the Model 16 for all I know. Researching the part number it looks like IH also used them on a hay rake or two...
  5. B

    Schwartz wide front vs. factory height.

    Mine is 35 3/4" and 36 1/2" To the axle center is 28 1/2" Are those Titans 14.9 x 38" in the pic? They look too big for 14.9's and look like 16.9 x 38" on widened rims if I were to guess.
  6. B

    Correct seat assembly SM Farmall.

    You'd be surprised what they have for cars, trucks and tractors. I opened up a Walmart+ account a few months ago and am slowly abandoning Amazon for various reasons. I had $38 worth of Walmart cash from buying groceries so used that for my "free" seat shock. No shipping either. I've been...
  7. B

    Correct seat assembly SM Farmall.

    Where on earth do you get the idea that I ordered a shock for a passenger car??? https://www.walmart.com/ip/RAParts-Seat-Shock-Fits-FARMALL-200-230-300-350-400-450-C-H-M-Mid-Mount-Seat-Shock/555561126
  8. B

    Schwartz wide front vs. factory height.

    Forgot to mention, this is a SM.
  9. B

    Easiest/best LED conversion.

    I have a '53 SM Stage 2. I don't care if I have pancake lights or the tear drop lights on it. Both would look correct on a '53 to me. What's the easiest led lights to do that look like factory? I don't care for the look of some led's from the front that don't look like factory lights.
  10. B

    Schwartz wide front vs. factory height.

    I am getting sick of my after market Schwartz wide front end. It's ugly and I am sure they make the front end sit higher than a factory IH wide front which I really don't like. I just measured mine with Titan 6.5 - 16 tires @ 35 psi. It's 34 7/8" to the grease zerk in the front of the...
  11. B

    They do, thanks. I also found this place with free shipping FYI...

    They do, thanks. I also found this place with free shipping FYI. https://www.liftpartswarehouse.com/product-p/wn-12x38dwrim.htm
  12. B

    12" x 38" drop center rims.

    Yes, shipping is an issue. I can't remember the name of the place right now but shipping was like buying a third rim when I priced them out.
  13. B

    12" x 38" drop center rims.

    Goodyear Farm DT800 Super Traction R-1W 149 A8 These are the metric radials that are going on it. They are a R1W tire at about 70% tread which is about the same as a new bias ply tire. The tread looks like an original old 45 degree bar.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top