Recent content by bobfromill

  1. B

    190 steering

    the steering is kinda jerky. Just wondering what it could be. There arent any leaks in the system. There is a canister that runs next to the frame rail that feeds the pump.was thinking it was a cooler but it has no water lines. The system almost seems like it is getting air in it.
  2. B

    replacing gov, weight ring roosa pump

    Allis 190 diesel. Iwill be replacing the weight retaining ring and am wondering if the rotating head assembly can be removed easily or does everything need to be torn apart to get to that point. the service manual only shows how to completely rebuild.
  3. B

    190 roosa pump

    I am pretty mechanically inclined and plan on replacing the retaining ring on the pumps. i have the sevice manual and parts manual andI am wondering if the head can be slid out of the housing and the retaining ring be replaced without totally disassembling the pump? these are both real low hour...
  4. B

    190 roosa pump

    Engine idles fine but when revving it will stall out. Restarts fine but does the same thing. recycle line to tank is clear. removed the recylce line from thetop of pump and still does it.Removed the glass check ball nipple and it runs fine, reinstalled the check while it was running and it quit...
  5. B

    D19

    Looking for a 3-4 shift fork and rail.wondering if D17 is the same since they have the same shift pattern and number of gears.
  6. B

    190 injector pump

    yours almost sounds like a shift rail or detent problem. if you have a service manual or if youve got some prior experience remove the center section of platform, the diamond tread floor. disconnect the shift rod from the top of trans cover andremove the cover. inspect the shift forks and the...
  7. B

    190 injector pump

    After looking at the sevice manual i decided to pull the top off the pump and exposed the governer/shut off. it had been sitting so long in the off position that it stuck when i pulled the cable to the on position. after moving it a couple times i put back together. SWEET!!! It started right up...
  8. B

    190 injector pump

    Working on my 190 diesel and almost done. had to replace rear end and trans gears. Tractor has been sitting for 16 yrs. and I have replaced all filters and flushed everything. the problem is that I cannot get fuel to the injectors. there is fuel getting to the inlet of the pump and the primer...
  9. B

    190 linkage

    does anyone have some detailed photos of the hydraulic and power director linkage routing under the platform. putting back together but it has been apart so long that i forgot how it went.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top