Recent content by Carter W

  1. C

    83 Toyota PU window

    I have a 1983 Toyota diesel PU that desperately needs the runners on the windows greased. It is very hard to roll the windows up or down and I don"t want to eventually break the handle. Is there a way to grease without taking the panel off the door? Thank you men.
  2. C

    8n gas tank

    Is the gallon of fuel in the reserve portion of the 8n tank separate from the rest? If I never open my fuel control valve more than two turns does the reserve portion get stale? Perhaps someone has a cut out picture of the tank to show me how it works. Thank you men.
  3. C

    Spark plug gap

    Yes. The points are at .15
  4. C

    Spark plug gap

    1948 8n 6v front mount distributor. Just installed new Autolite 437 plugs and gapped them at the called for .25. Tractor runs very rough. I opened up to .30 and it runs somewhat better. At .35 it runs fine. What"s this telling me? Should I be using a different plug. I realize if it runs well at...
  5. C

    Oil Brands

    How do you men feel about oil brands and their quality? Are Pennzoil, Quaker State, Vavoline, etc., all about the same? I've had a 1948 8N tractor for 20 years and have always run Pennzoil 30 weight but was just wondering your thoughts considering some brands are cheaper then others. Thanks
  6. C

    Charles Krammin, Ultradog, Dunk, Brian Jasper

    Thank you men for your suggestions. Charles, you hit it right on the head. When I got the tractor it did not have an air filter or air filter housing. It did have the screws to hold the housing on and, unknown to me, one came lose and went into the carb and ended up jamming the intake valve. The...
  7. C

    Les, Joe Csuti

    Thanks for your thoughts and suggestions. One of the screws that holds on the air filter element came lose and dropped down in the carb and ended up jamming the intake valve. When I first got the tractor it didn't have the air filter so it was easy for the screw to work its way lose and drop in.
  8. C

    JD 70 won't start

    I inherited an old JD 70 riding mower with a Tecumseh engine model VH70. I took it out today and ten minutes into my run it died like a flash. It won't start now. It has spark and gas. It turns over but all I get is a pop, pop, pop from the carb and exhaust and when I stop trying to turn over...
  9. C

    John Deere 70 Riding Mower

    I inherited an old JD 70 riding mower with a Tecumseh engine. I took it out today and ten minutes into my run it died like a flash. It won"t start now. It turns over fine but all I get is a pop, pop, pop out of the carb and exhaust. Then when I stop trying to turn over the engine white smoke...
  10. C

    Merry Christmas

    In 2009 I received several solutions to my problems with my 48 8N from you men on this website.Thank you for your help and Merry Christmas!
  11. C

    Hen's eggs

    You have all been very helpful. Thank you
  12. C

    Hen's eggs

    You men have been a big help to me in the past regarding my 8N. I just inherited 24 laying hens. Please give me tips on keeping the eggs fresh before I sell or give away.I"m use to a dozen from the store eaten in a few days. Refrigerate right away? How long do they last before going bad? Wash...
  13. C

    What happened?

    48 8N, 6 volt, front distributor. Just did complete tune-up including replacing wiring harness. It started up like a champ and ran great for the first day. Then today when I started it with throttle at half it reved like it was at full throttle for about two or three seconds then backed down to...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top