(800) 853-2651
SHOP NOW

Recent content by FSA1953

Yesterday's Tractor Forums
  1. F

    International B414 Diesel

    Here's my cover looks to be about the same
  2. F

    International B414 Diesel

    Yes I do
  3. F

    International B414 Diesel

    I used the picture off the Internet for reference. So the isolator should always stay in the open position which I'm assuming all the way out?There is a plug over the auxiliary and where the hose comes out. The flow only turns alittle bit about 1/4 to 1/2 turn not like the isolator which I can...
  4. F

    International B414 Diesel

    I'm new to this style of tractor and trying to figure out how the 2 knobs work. Top left one screws in and out about an 1" while the bottom screws in and out about 1/2". Any help would greatly be appreciated. Thank you
  5. F

    Woods belly mower

    Yeah I thought about that also. I guess I'll order a new belt and see what happens. Thank you Julian
  6. F

    Woods belly mower

    That's the problem I don't know what model it is. There's no tag or stickers. It runs off the PTO pulley behind the seat.
  7. F

    Woods belly mower

    I attached photos of what I got. I think I have to much of a twist on the middle pulley cause when the PTO pulley turns the belt it turns the belt with the v groove upwards.
  8. F

    Woods belly mower

    The belt is pretty much shot but using that for now to get it routed correctly.Then I'll order a new belt so if it breaks I'm not worried
  9. F

    Woods belly mower

    I've installed my mower deck on my Super A no problem. The problem I'm having is getting the belt routed correctly. Which pulley do I start with first? Owners manual says right pulley but the picture shows the left pulley then the middle then the right pulley. Do I start the routing of...
  10. F

    59 Ford 621

    It steers fine when front is off the ground and it steers when on the ground but alittle tough plus there's a loader on it which might be why it's steering tough. I guess I'm thinking it should turn like the power steering on a vehicle I could be wrong.
  11. F

    59 Ford 621

    Here's the pressure hose which I think myself is to long 48. The one's I see on the internet are about 35-3/4 long. Should I replace it with the correct length? Thanks
  12. F

    59 Ford 621

    The parts are just the seals. I got the seal kit from here.
  13. F

    59 Ford 621

    I rebuilt the power steering pump and it still turns a little hard on the ground up in the air turns with ease. Should it be driven around for a while or should I flush the system and how would that be done? It has a Eaton pump with top reservoir,new filter. I think the pressure hose is a...
  14. F

    59 Ford 601 Workmaster

    Thank you sir. We be sending over the photo shortly
  15. F

    59 Ford 601 Workmaster

    JMOR evening would you happen to have an email where I can do this thru you and nobody else chiming in. I can email you photo of what my buddy and I have done so far on the wiring and show where we have got the wires going and you can check to see if correct or I need to do some changes...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top