(800) 853-2651
SHOP NOW

Recent content by ih844

Yesterday's Tractor Forums
  1. I

    Case disc help

    So they are not greasable then, correct?
  2. I

    Case disc help

    I just bought an old case disc, I believe it's an s-118? I can't find a single grease zero on the bearings for the gangs, and noticed they're a one piece bearing by the looks of it, not a two piece that can be easily taken apart. What I'm wondering is, does the whole gang axle need to be taken...
  3. I

    IH 844 injector nozzles

    I've been working it pretty hard all year, in the winter it still gets lots of idling for warm up cause it's -20 to -40c here. But it worked pretty hard this summer pulling plows, haying, and this winter with plowing snow I've been loading it down to almost stalling out in 2H, about 4 hours of...
  4. I

    IH 844 injector nozzles

    Ok, when I know which ones I need, where do I get them from?
  5. I

    IH 844 injector nozzles

    My 844 is smoking quite a bit at idle, has been for years, but doesn't burn a lick of oil which is pointing me towards injector haze. I have a guy near by that is able to test them for me, but I can't find new nozzles for if they are bad. Anybody know where to find them?
  6. I

    Jd 1380 oil

    Would hygard work? I saw a couple guys mention using that
  7. I

    Jd 1380 oil

    Also curious what that small line is for
  8. I

    Jd 1380 oil

    Just started cutting with my jd 1380 swinging haybine with the hydraulic pto. Severed that small hose that goes to the pump, and dumped all the oil out. Wondering what oil it takes, and if the pump should be okay, it made noise for about 30 seconds then quit cutting for 5 seconds before I cut...
  9. I

    Ih 6200 drill sprocket location

    Here's some pics of mine My fertilizer drive is run off those 2 gears, it seems those 2 sprockets right next to each other are the ones I'm wondering about. The one on the left is the "special 14 tooth" I believe. Which would tell me I need to double the quantities, so if the chart says it'll...
  10. I

    Ih 6200 drill sprocket location

    Sprocket 4 and 5 I have are both 14t. Why does it show 2 different 7 tooth sprockets for "5" and why would one be slow, the other regular? Is the bottom one (grain drive 7 tooth slow speed) actually on a different shaft?
  11. I

    Ih 6200 drill sprocket location

    Is the 14 or 7t sprocket on the shaft the press wheels are on? Or is it on the shaft under the boxes with 2 sprockets right next to each other, mine appear to be 2 14t sprockets right next to each other. On the seed charts it seems to suggest that the quantities are doubled when the "special 14t...
  12. I

    Ih 6200 drill sprocket location

    Recently bought a set of 14' 6200s, and after getting them home I was reading the charts on the grass box (going to use one for alfalfa seeding) and saw it mentions using a 14 tooth drive sprocket instead of 7. Which sprocket is it talking about? I haven't been able to find any info about it...
  13. I

    Baler identification

    He said its a hard core.. if it is a soft core I'll definitely skip that one as they won't store over the winter well enough
  14. I

    Baler identification

    Yeah the only other baler I've found remotely near me for cheap is a MF 1560, but its 900, further away, and the belts on it look like dust. Every other "cheap" baler is around 5 grand, which is out of the budget right now especially for a field that's only 20 acres and puts out one cut a year
  15. I

    Baler identification

    Here are the other 2 pics he has of it
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top