Recent content by johnmor

  1. J

    British made Zenith vn carburetor

    I had a 434 British version given to me that I have torn down and in the process of rebuilding. The carburator, a Zenith Vn is a bit of a mess. The accelerator pump was stuck but finally got feeed, and there was a lot of cleanup required. I have a pretty good exploded view of the thing but it...
  2. J

    Hesson 4 basket tedder m/n 3717

    I have an issue with my tedder. One of the outside baskets does not spin with the pto shaft. I dis-assembled it and found the bevel gear (#16) at the end of the basket drive shaft (#23) had slid back of the shaft to the point where it was not meshing with the mating gear. The gear is keyed but...
  3. J

    Hesson 4 basket tedder 3717

    I have an issue with my tedder. One of the outside baskets is does not spin with the pto shaft. I dis-assembled it and found the bevel gear (#16) at the end of the baskets drive shaft (#23) had slid back on the shaft to the point where it was not meshing with the mating gear on the basket. The...
  4. J

    434cCarburator Rebuild

    I have an International 434 British built with a bc144 down draft carburator. The tractor had been sitting for several years with the intake uncovered. I have it completely torn down with the exception of the accelerator pump piston that seems to be frozen in place and cannot get it out. Any...
  5. J

    John Deere 4520 Fuel Injector Pump Issues

    Thanks for all the responses, very informative. Glad to hear I have the good one. How do I get in contact with Dieseltech?
  6. J

    John Deere 4520 Fuel Injector Pump Issues

    Sorry for the delay, got a hip replacement a week ago, still moving slow
  7. J

    John Deere 4520 Fuel Injector Pump Issues

    We recently purchased a 4520 that needs a new or rebuilt fuel injector pump. It still runs but we have found some shavings in it but also have some governor issues with it which I understand is common with one of the pumps used. Problem is that I don't know which pump it is. My pump is a...
  8. J

    John Deere 4520 Batteries

    Thanks! I would like to see it
  9. J

    John Deere 4520 Batteries

    I recently aquired a 4520 and it has 2 6v batteries in series. I need to replace the batteries and am considering purchasing two 12V batteriesand wiring them in paralled. Does anyoner have any experience with this?
  10. J

    John Deere 894 hay rake wheel

    I have used them in the past and have phoned a couple with no success. Seems they only hang onto the high dollar stuff anymore, Any suggestions regarding a yard that may have this?
  11. J

    John Deere 894 hay rake wheel

    Yes, 4 bolt. I will check Heywheel to see what they have. thanks!
  12. J

    John Deere 894 hay rake wheel

    I purchased an 894 hay rake, bretty bad shape but have resolved most of the issues with it. Problem is, one of the wheels had a bad tire and rim and I cannot seem to find a replacement rim for it. I tried Lindstrom Equipment but they say the product is on back-order and don't know when they...
  13. J

    CaseIH 1075 Hydraulic Issue

    My tractor, when it is cold, needs to warm up before it will move. It has a loader and the loader works very shaky until it warms up and there is no steering. In 20 degree weather it takes about 5 minutes to warm up. It has a F/R shuttle shift and once the tractor is warmed up I can shift to F...
  14. J

    Spark Plug for 434 with BC144 Engine

    Thanks for the replies. I think I need to have another discussion with my parts guy!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top