Recent content by jricherson

  1. J

    Power steering to manual

    I have a 65 4000 3 cylinder and the power steering cylinder is leaking bad! I did a reseal but the shaft seems to be bent. When I steer to the right it blows out the seals. I am restoring it and the PS system always leaked out of the external reservoir and I sealed it up. When I redid the...
  2. J

    Ford 4000 3 cyl. Diesel Flywheel cracks

    I was hoping not to buy a new flywheel. The cracks are only where the clutch rode on the flywheel. The pressure plate had the same type of cracks.
  3. J

    Ford 4000 3 cyl. Diesel Flywheel cracks

    I am replacing the clutch and noticed the flywheel has small cracks in the surface. Looks like brake rotors that got hot. It is original and not sure if worth resurfacing or replace? Have a pic but not sure how to post.
  4. J

    Ford 4000 38 rims needed

    I have a 1965 4000 and has 13.6x38 tires and the rims are rusting around the valves and need to replace them. I think they are 12X38 rims with 8 loops. Where is the best place to get economical rims? I am about to split it to replace the clutch and hydraulic pump also, Any suggestions would...
  5. J

    38" rim replacement

    Forgot to add that it is a 8 loop rim.
  6. J

    38" rim replacement

    I have a 1965 4000 and one of the rims are about rusted through around the valve stem and you can move it. I am having trouble finding a new rim. The tire on it now is a 13.6-38 and wanting to try and use it. Any suggestions on where to find a new rim?
  7. J

    4000 PS reservoir leak

    I have a 65' 3 cyl. 4000 with the PS reservoir seperate from the pump up behind the battery. It has a slow leak from the bottom somewhere around the spot welded mounting bracket and wondering if there is a way to fix or buy a new one or options? Thanks
  8. J

    JD317 with Onan 18hp not charging and dying

    The voltage with all hooked up is 14.4 vdc on the battery. I have checked for any shorting or worn wires and cannot find any. When the blades are engaged the engine will backfire run rough then eventually die or I shut it off as it runs really rough and thought it would hurt the engine. Thanks...
  9. J

    JD317 with Onan 18hp not charging and dying

    yes it looks like the picture and I am getting about 35 volts out of the two black wires.
  10. J

    JD317 with Onan 18hp not charging and dying

    There are 2 black ones that are connecting to the AC and a White/Red stripe wire to the middle plug.
  11. J

    JD317 with Onan 18hp not charging and dying

    I have a JD317 that had the Kohler replaced with the Onan 18HP and since I have owned it 1 of the AC wires has been disconnected. When I connect the wire the engine dies within 2 minutes. My battery never stays charged. I bought a new VR and same problem. Any help would be appreciated. Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top