Recent content by LGoff

  1. L

    D3B serial number

    Thanks for your help. Mine has a tag, but it's on the outside of the dozer. It has engine & trans info. The engine info is: 45V68437 and 2w4387. Anyway, I think I found what I was looking for. There is a dealer tag put right beside where you put oil in. It's a dyno tag. It has a project #...
  2. L

    D3B serial number

    the only thing i see, it's not a tag but is stamped on lip valve cover. it's 1w1523x. The # that's on the tag on outside of dozer, is 2w4387.
  3. L

    D3B serial number

    I bought a D3B that is supposed to have had a complete new 3204 engine from CAT. Where would i find the serial # on the engine. I am wanting to compare it to the serial # that is on the tag that is on the dozer near the engine compartment.
  4. L

    Slow cranking on D3B

    So, the original cables aren't good enough? I'm not sure where I can find a heavier cable than what's on it, or do they just need replacing?
  5. L

    Slow cranking on D3B

    I've got an 1987 D3B that drags when cranking. Usually after the machine is warmed up, it cranks better, but overall it just turns slowly. A mechanic told me that these machines are notorious for it, maybe the starter should have had more of a gear reduction or something. Even with a new...
  6. L

    D3B that won't move

    I've drained the oil and found the screen. I'm going to buy another screen and put in it, just to be sure. It did have some metal shavings in it, but I would not say a bad amount. I'm not convinced this will fix it. It had got to the point of when I crank it up cold, it would not move but...
  7. L

    D3B that won't move

    mine is the 3F/1R and i did not see a filter. I will change oil and check everything and see what I can find.
  8. L

    D3B that won't move

    yes, won't move forward or backwards. thanks, i will check.
  9. L

    D3B that won't move

    I am having trouble with this machine just stopping. It ceases to move. I originally noticed that in the morning, when first cranked, I could put it in gear and it would not move. I could try again or maybe rev engine more and it would go fine and be fine the rest of day. Now, i can be using it...
  10. L

    Cat D3B

    It's just hard to find a gear oil that is lower than 75W or 80/90W. I did find a 50W at the local NAPA, but it's synthetic and it's $120 dollars for five gallons.
  11. L

    Cat D3B

    so, just use Shell Rotella T instead of hydraulic fluid?
  12. L

    Cat D3B

    Just bought a 1987 D3B. The bevel gear oil doesn't even touch the dipstick. What weight gear oil do I use? Just any type of gear oil? Also, besides the Cat brand 10W hydraulic fluid, is there another brand that is cheaper but will work?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top