Recent content by Lieu

  1. L

    Steering slack in Farmall Super A

    560Dennis, the video that pulled up from the link was for a Cub. Is the process the same?
  2. L

    Steering slack in Farmall Super A

    RTR, thank you for the thorough reply. One question, is this something I should fix or on a seldom driven tractor is it something I should be concerned with?
  3. L

    Steering slack in Farmall Super A

    How do you adjust out the slack? I saw a warning online somewhere that said you don't want to do this, so I am flying blind on what to do.
  4. L

    Steering slack in Farmall Super A

    I own a 1954 Farmall Super A-1 that is restored and I only take it for short drives around our farm and tractor shows. It has approximately 7" of steering play when measuring around the circumference of the steering wheel. There is no forward or rear slack in the steering wheel, the tie rod...
  5. L

    Oil leak top of transmission Massey Ferguson 135 Deluxe

    I have a Massey Ferguson 135 Deluxe I mostly use for tractor cruises. I took it on a 1-man cruise the other day and it was leaking oil out the top of the transmission. It appears to be coming from the two flat sided plug in the center of this picture. What is this plug for? I tightened it a...
  6. L

    IH Disc for Farmall Super A

    I have the attached disc I would like to restore for my Super A. Does anyone have any photos of the correct paint schemes they can share? Thank you.
  7. L

    Farmall A-1 Hydraulic Question

    I recently purchased a 1954 Farmall Super A-1 with a cultivator. I noticed you can only lower the cultivator with the engine running. My question is, is it safe to leave the cultivator in the up position when not in use? Sure would make it easier to pull start or roll around if needed. Thank you.
  8. L

    Farmhand F60112A Loader

    I failed to get a photo of the pump, missing shaft or the entire unit. All I got were these of the logo.
  9. L

    Farmhand F60112A Loader

    This one does not have a pump that fastens to the PTO. The pump is mounted to the rear frame of the loader, has a shield that protects the PTO shaft. The pump and shield is there but the shaft is missing.
  10. L

    Farmall F 20

    Thank you for the information Red for life. The F20 I am looking at is 613xx, so it would be after yours but not by much. I am confused when you stated your tractor 611xx was gray, but you said in the next sentence that for it to be originally red it would have to have a serial number...
  11. L

    Farmhand F60112A Loader

    I found one of these today. Does anyone have any information, literature, mounting instructions or photos they would be willing to share? Any idea where I could find a PTO shaft and the mounting brackets for it? Thanks so much.
  12. L

    Farmall F 20

    I looked at an F20 today that had been painted red a few years ago when it was restored. The serial number tells me it is a 1936. According to Tractordata.com, IH still painted them gray in 1936. Did the restorer paint this one the wrong color or does anyone have any ideas? Thanks for the...
  13. L

    Hydraulic line elbow needed

    It does not have NPT threads on both ends. One end does, 1/2 NPT. I found out today from a local NAPA store that the other end has #12 fine thread, or a 1 fine thread nut fits it. At any rate, I have not found one but I am on the trail of a couple of used ones.
  14. L

    Hydraulic line elbow needed

    Does anyone know where I can purchase one of these hydraulic line elbows? The end that screws in the cover is 1/2 NPT, not sure what the other end is. Thank you!
  15. L

    Low oil pressure VAC

    Thank you to everyone's great advice. I made my own stem from a piece of copper tubing and it seems to have increased my oil pressure ~ 2 lbs.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top