Recent content by maxazillion

  1. M

    3-point lift arms will not go down TO 35

    Thanks for your help. I loosened the control valve nut some and it starting working.
  2. M

    3-point lift arms will not go down TO 35

    I recently installed a new hydraulic pump on my new TO35. I tried to follow the instructions in the manual on the lever adjustment but never could get the levers to do as it said in the manual. Attached are pictures of the lever and valve when the 3 pt is up. Are there any adjustments that can...
  3. M

    Aftermarket starter TO30 will not fit.

    I recently purchased a TO30 that was missing a starter. I moved the tractor with a borrowed starter that installed fairly easy. I purchased an aftermarket starter to use on the tractor. I have wrestled that thing for 4 to 5 hours trying to get it to fit. Are there any secrets techniques to get...
  4. M

    International 454 3 point leveling box.

    I am inquiring as to how hard is it to rebuild the leveling box on an International 454. I have a parts book but it don't tell me much. I see that parts are available but would like recommendation's as to just rebuild or replace. Thanks for any suggestions.
  5. M

    Tractor Engine Weight IH 454

    Hello All Can someone tell me about how much the engine would weigh on a 1971 IH 454 gas tractor? I want to make sure I have an adequate engine stand should I rebuild the engine. Tractor data says the shipping weight on the tractor is 3800 lbs. Thanks.
  6. M

    Distributor Main shaft 454, 464,574

    Hello All I am inquiring if anyone knows if it is possible to purchase a new replacement main shaft for a distributor (1846978, 1970221) for a 454 or 574 tractor. I have scoured the web with no such luck. These shafts are obsolete but didn't know if it was possible to get one from somewhere...
  7. M

    Old 454 Motor Question

    Have a question for some of you old motor gurus. I finally did a compression test on my 1971 454 and got the following readings: #1-137 dry, 140 wet #2-135 dry, 140 wet #3- 50 dry, 50 wet #4- 150 dry, 162 wet Do you think this is a candidate for a complete valve job? Or do think it...
  8. M

    IH 454, 464, 574 Fuel Pump

    I was wondering if anyone can tell me if there if a fuel pump rebuild kit for an IH 404769R91 fuel pump (AC Delco 40600). I haven't had much luck finding one on the web. I would like to rebuild my original fuel pump if possible. The aftermarket ones seem like they are not really very good. Thanks.
  9. M

    Bypassing a leaking brake equalizer valve for IH 454

    Anyone on the forum have any information on how to bypass a brake equalizer valve? I recently rebuilt my valve but it has started leaking again. I found a couple of posts about bypassing the valve by replacing the 2 tee fittings with elbow fittings. If you connect these to the supply lines do...
  10. M

    IH584 loss of steering

    Do you know what the part no. is for this vacuum cleaner belt seal is? Thanks.
  11. M

    454 Power Steering leak

    I am inquiring about a power steering motor leak on a 1972 454. I noticed the other day that I had oil dripping from the bottom of the power steering pump. I changed the upper shaft seal a year ago and know it is probably not that. Is there another seal to replace or do I have to bite the bullet...
  12. M

    454 Replacement Radiator Question

    I need a replacement radiator for my IH 454 and was wondering if anyone knows if a 574 gas tractor radiator will work on the 454? The height is about 1 1/2 inches higher , the width is the same and the rest of it looks the same. The price is about $500. The re core is going to be about $700 to...
  13. M

    TO20 TopLink Rocker Bracket Bushing

    Thank you for your reply. I figured out that Ford has a part that will work just the same for $5.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top