Recent content by Michael P.

  1. M

    1965 Ford 4000 PTO will not shut off.

    Hey guys, I'm working on a 65 4000. It has an independent PTO, I think, and it starts up as soon as the tractor is started. Working the lever back and forth does nothing to stop the PTO. Any ideas on what would cause this?
  2. M

    640 Rear Lift - Just can't figure it out.

    Thanks JMOR, that was indeed the problem. Was stuck, and all we did was pull it out and put it back in, works like a charm now. Looks like I'll be plowing today. :)
  3. M

    Census

    List one government ran program that works. I don't understand why so many people are easily fooled into thinking that Gov. Health Care would be any different. Plus, with Gov. claiming to be footing the bill (we all know who really pays for it), who's to say they won't start regulating more and...
  4. M

    640 Rear Lift - Just can't figure it out.

    Thanks, JMOR! Hopefully this is the culprit. Will post back once we get a chance to try it.
  5. M

    640 Rear Lift - Just can't figure it out.

    That might be the only thing we didn't pull. Is this behind the two plates that keep the control valve in the cylinder itself?
  6. M

    640 Rear Lift - Just can't figure it out.

    We took the lift cover off today and replaced all the o-rings and gasket, but still couldn't get it to lift. We bled the pump and also ran the tractor with the lift plate off to see if fluid was pumping out where the tube meets the lift cover and it was. We used an air compressor to test the...
  7. M

    Ford 4000 - Unknown chassis type.

    @Fordfarmer Haha, I did double check the numbers after not being able to figure it out, but those are the numbers stamped on it. I still haven't found anything to explain a "41" chassis code. I do know (just by examining the tractor) that it's a 3 cyl. diesel with 8 speed transmission, and an...
  8. M

    more work on the 4000

    haha
  9. M

    Ford 4000 - Unknown chassis type.

    After some scrubbing, I finally found the ID numbers on my tractor. I used this site (http://www.springfieldbiz.com/oaktree/rhcodes_serial.html) to ID the tractor, but hit a wall with the code for the chassis type. My model number is D4114C. Can anyone tell me what the "41" chassis is?
  10. M

    progress onthe 4000

    Nice! I love the styling of the 53-64 Fords. Saving the wheels for last? haha
  11. M

    Ford 4000

    Thanks Fordfarmer! I was completely lost on what that pedal was.
  12. M

    Ford 4000

    I finally got that 4000 moved yesterday. After about 30 mins of tinkering we actually got it to start and drove it back and forth a few times. (It has set up for 20+ years, so once I tried to turn the wheel, the high pressure hose going to the steering cylinder busted.) I don"t have much...
  13. M

    Jubilee 3 point problem, Help!

    On the pump there are the two plugs you referred to. The one closest to the front of the tractor is used for purging to get air out of the hyd. system.
  14. M

    1969 Ford-2000 Decal

    Not sure if this helps. This is off of my 1965 4000 with the 3 cyl. diesel. If it"s what your looking for, I can get a better picture and take some measurements for you.
  15. M

    Picks of the 4000 in need of some TLC.

    Just south of Atlanta, and we do get somewhat cold around here about every two years. Lowest is usually around 20 F. As Fordfarmer posted, this has been converted to horizontal exhaust.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top