Recent content by mrbilman

  1. M

    41 H shifter boot ...

    Go to the www.jdhpubs.com web site and there is a good write up in the articles/diagrams tab called gear shift. Pat Browning described in detail how everything goes together. The interesting thing is that the order that he shows the parts puts the spring under the leather boot. The parts book...
  2. M

    h foot throttle

    Has anyone helped you with this? If not I have a copy of the instruction manual that describes how to remove the clutch pully and readjust the clutch I could e-mail you.
  3. M

    Qustion for A GURU

    Thanks Tim, Like most everyone I'm interested in were this tractor was originally shipped and what options it had when shipped. My curiousity has not reached the TC menbership and $35 level just yet. Thanks, Bill
  4. M

    Qustion for A GURU

    Tim, Do you have shipping data for Model H tractors? Thanks, Bill
  5. M

    John Deere H Governor

    There are no oil lines. It will just lift off. There are two dowel pins so the housing will have to come straight up to clear them.
  6. M

    John Deere H

    The H should not have the circle "H" on the grill. The "H" indentifier is the decal on the channel that the seat is mounted to and of course the serial number tag. I can't help you with a picture of the throttle springs. I know that mine are not correct.
  7. M

    John Deere H

    This one fits on my trailer that is 6'3" wide with the hubs flush with the end of the axles.
  8. M

    John Deere Drag Disk

    This is a picture of a 5 foot JB disk. (Note: the disk scrappers are missing)
  9. M

    JD H

    I couldn't find the answer to this question when I installed mine. I used the head gasket instructions (smooth side towards the block) and followed suit with the smooth side toward the head. I don't know if that reasoning is right but mine doesn't leak.
  10. M

    Dual H

    This is a picture I found in the JD 365 day calender. It shows one way to mount duals. With a harrow front tractor I would mount the outer rims the other way and put the hubs closer together to reduce the distance between the tires and reduce the overall width of the tractor. Sorry about the...
  11. M

    Let's see the JD H's pics please...

    JD Workman, Can you send or post pictures of the generator on your tractor? I have to mount the generator on mine and am having trouble figuring out how it tucks up under the hood. Thanks, Bill
  12. M

    JD H

    I did as Pat said but had to go one step farther to get them to slide on and off. I applied yellow paint (or anything you have in a spray can)on the axles and slid the hub on with the paint still wet until it stopped then gave it a rap with a piece of wood. Then pulled it off and I could see...
  13. M

    Old Disc

    I just picked up a model JB and may of the parts start with KK. You can look at the parts list with some pictures on the JD Parts web site. Do you have a picture?
  14. M

    2 Cylinder gas cap hazard

    I was plowing with my H today and when I shut down the tractor I heard a faint hissing sound. I traced it to the gas gap and believed that the tank was at a negative presure. To my surprise the tank was actually pressurized and the cap came off violently as I turned it. Luckly there was no...
  15. M

    JD H removing hood

    Take off the steering wheel and the shaft key. Remove the medallion (front sheet metal hood) and then remove the bearing housing from the front of the steering gearbox. Turn the steering shaft (I don't remember which way but if the front wheels turn go the other way) and it will screw out the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top