(800) 853-2651
SHOP NOW

Recent content by pea_grower

Yesterday's Tractor Forums
  1. P

    MF65 injector pump removal

    Anyone want to tell me about removing the CAV injector pump on a 65? I've never done it
  2. P

    Temp gauge on a 1981 model 2705

    Found it On the water pump housing Was covered in oily dirt and couldn't see it.
  3. P

    Temp gauge on a 1981 model 2705

    Temp gauge isn’t working on my 2705 with the 354 Perkins. i want to check the sending unit and have removed the hood to power wash the engine. Still can’t find the sending unit. Would someone help me out and tell me where it is?
  4. P

    MF 2705 hydraulic oil

    Update (if anyone gives a hoot): I put 21.5 gallons in so far, and its not quite to the upper mark. Another gallon should do it, at least before the tractor is cranked
  5. P

    MF 2705 hydraulic oil

    Decided I needed to change the hydraulic oil in a 2705 with what I read is a 30 gal capacity. Using the 3 drain plugs, I might have gotten 15-18 gallons out. Is that all that I'm going to get out of it? Didn't know if some would drain back if I loosened the spin-on filters, Or if there was...
  6. P

    MF 2705 dash warning lights

    Found that transmission/hydraulic oil was dirty. Jerky steering and 3-point. Changed filters and works like it should. But have found that I dont have many warning lights working on the dash. Only ones I'm pretty sure of are the oil pressure warning light (comes on with key) and the coolant...
  7. P

    F2 thresher beater

    Thank you. That helps immensely I put a spike cylinder in to pull pea vines thru. Wondered if the thresher beater would come out if the the tailings cross auger was removed. Wish I had a service manual.
  8. P

    F2 thresher beater

    The roar I heard before probably wasnt the variable speed for the pulley. Bearing was out on the thresher beater shaft right next to variable. Replaced that and found the beater wouldn't turn freely. Looked closer and have a chunk out of the end piece of the thresher beater. It's going to have...
  9. P

    F2 variable speed for cylinder

    Had a roar in the variable for the cylinder speed. I wont tell all that it could be, other than it wasn't put together like the parts book shows. 9 on the pic is a shield that goes between the bearing race and the snap ring. What is the purpose of this shield and is it really necessary?
  10. P

    versatile 400 swather-hydraulic oil filter

    Called dealers here in Oklahoma, after wore gave me the part number. First one could order, but had to buy six. Told him i'd take two, but he'd never sell the other four. Was gonna take napa several days to get one in. Just decided I'd call ND and Williston had them and are shipping.
  11. P

    versatile 400 swather-hydraulic oil filter

    I did miss that post. Thank you for pointing it out. And thank you for the part number
  12. P

    versatile 400 swather-hydraulic oil filter

    Just got to pulling the hydraulic oil filter on the swather. Believe Id rather have a filter that's better than this. Dont see a number on it anywhere. The serial number plate says a 1977 model. Used the locator on website Jim suggested, and Parallel Ag knows nothing. Can anyone help me with this?
  13. P

    Brake bands on Versatile 400 swather

    Who handles Versatile parts now? I want to change the hydraulic oil filter, but would like to have one on hand. Swather says a 1977, not a spin-on filter. Any ideas?
  14. P

    Brake bands on Versatile 400 swather

    First, I didn't realize that I'd posted so many questions on here over the years. Bought another 400 and used a swather trailer that carried entire machine. Nearly killed me getting it off. Think the brake bands were hanging up or at least one was causing it to spin around. Does anyone use that...
  15. P

    F2 Gleaner seat

    I want to get my seat recovered before October harvest, but having a heck-of-a-time trying to figure out how to get the cushion/seat off. Its considered a Deluxe seat in the parts book. I doubt the thing has ever been moved, because I thought I could slide the seat forward to get at some bolts...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top