roper4570's latest activity

  • R
    roper4570 replied to the thread Working on the '49 M..
    Spray some good penetrating oil in it and use a fine wire or drill bit then compress air. Check it once in a while to insure it’s open.
  • R
    roper4570 replied to the thread Working on the '49 M..
    Right under the top cap you removed is a small hole to drain water and dust. Have worked on several that were blocked by rust and dirt.
  • R
    roper4570 reacted to T.R.K.'s post in the thread Husqvarna, seems to be slipping with Like Like.
    One other thing to check if the frame and transmission mounts seem o.k.: The clutch pedal stop hits the plate above the steering...
  • R
    roper4570 replied to the thread Cork crankshaft seals.
    I rebuilt a Wisconsin 12 hp a few years ago. I soaked the cork seals in engine oil for a few hours before installing them. Still using...
  • R
    Can you hear or feel gears sliding in engagement with engine shut down?
  • R
    Started out on L Case at 6 LA Case 900 B case 930 longnose 932 Case When I first started farming 1030 1175 1570 1976 wish I still had...
  • R
    roper4570 replied to the thread NOS Sparkplugs.
    D89D plugs are commonly used in Fairbanks and Morse engines used in oilfield pumping engines. They have extended electrode to help with...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top