(800) 853-2651
SHOP NOW

Recent content by shoeie

Yesterday's Tractor Forums
  1. M

    steering motor wobbles

    my dad is trying to install power steering on an old tractor. The power steering pump and motor are off an old 140,240,or 340 international tractor. We took it apart to put seals in and now when you start the tractor the steering wheel goes back and forth without us doing anything. It worked...
  2. R

    Super C exhaust temp.

    Jan or anyone else, I was wondering if you have ever put a tempature gun on the exhaust pipe of a C engine. I am still thinking about putting an air/fuel mixture gauge on my Super C. The instructions say it has to be over 600 deg's to work. Before I spent the money I wanted to make sure the pipe...
  3. C

    Frozen Hydraulic Pump

    I have a slight problem with my 135 Gas Deluxe - water more than likely got into the hydraulic casing through through the top.link boot. A repair I had planned on making but hadn't been able to because of work/school. I pulled the dipstick by the response control lever and there was milky fluid...
  4. L

    Fixing a Bush Hog

    Hey guys!! So, one of my friends managed to crack the rear wheel support on his old bushhog, and so we decided to fix it. He is learning to weld (bought my old tombstone when I got my stickmate, etc), and we each ran a side. It was kinda fun. I picked up some 6013 for a really basic how-to...
  5. A

    Super A

    I am trying to get an old super A running. It has been setting for quite some time. The first step was to take the battery out and try to charge it. When I got ready to hook it back up I noticed that the ground cable which runs to the block was hooked to the positive terminal on the batter...
  6. S

    o t chain saw bars

    They are called a Bow Bar. You can order them from a company called Baileys. WWW.baileysonline.com. 1-800-322-4539. They will send you a free Catalog. They deal in all kinds of logger supplies.
  7. S

    Farmall H grille

    Norm, you might try a tractor salvage yard in my area. It's called Burley tractor salvage. It's located in Paul, Idaho. 208-438-5420. They would probably ship you one if they have one which I'm sure they would, It's a pretty big yard. Oh would the access hole you talked about be for a crank.
  8. S

    Tire width adjustment

    In the days of this particular tractor for made wheel spacers to adjust width also. I remember using two sets of spacers on dads 861 ford to stretch out to 88". I think dad had a machine shop build his to save a few bucks.
  9. S

    Looking for Zenith carb gasket.

    You might try Rice Equipment, They carry alot of Farmall things like that. Worth a try. 814-226-9200. Good luck.
  10. S

    830 CK Hydraulic problem

    Some years ago I had a 930CK That had simular problems. I finally tracked the problem to a relief valve that was under the seat deck was sticking. It consisted of a plunger that slides up and down in a cylinder. I would take it apart clean it shine up the plunger and cylinder with emery cloth...
  11. S

    F20 gear lub

    That's all I have ever used in my F12 and F30. Never any problems
  12. S

    Farmall M Pulling

    The pulling club I belong to here in south-central Idaho is a stock tractor pulling club. The guys that pull the M'S are very competitive in their class. The M's are hard to beat. I pull a 37 farmall F30 and a 37 farmall F12, both stock. Both are Painted up and restored, sure is fun. We just...
  13. S

    Ok how do you report it

    Look at it this way. If there were a problem at school envolving a fire arm, your son could be an innocent victim. Don't know how I would report it, but I would no matter what it takes. Git er done Old.
  14. S

    Do these work?

    I haven't owned on like that one but watched one work this winter. It appeared that if the snow conditions were just right, light fluffy stuff it would work pretty good but The guy I seen running this one was having a heck of a time with it. May as well used a shovel.
  15. S

    1135

    This site right here has both of them. Kind of spendy. Service manual around $73, and operators manual around $30.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top