Recent content by teach

  1. T

    Help 540 trouble

    It was the carrier / housing and the seal. Part of the seal was in the bottom of case and the other part was on the shaft. The retainer/carrier/ housing was wore pretty good where it rattled against the ring gear. I am glad you mentioned lock tight; I was considering using it but wasn't sure but...
  2. T

    Help 540 trouble

    I got myself into one today. Trying to fix a leak from the Hyd into the rear housing. It is a friends and he thought it was the 3 pt cyl leaking so I pulled the top cover. I found some pieces on the pto shaft. One is definitely a seal another is a seal housing that goes on the back side of the...
  3. T

    Front Blade for a Super C

    I push a lot of snow with a 200. Only time it is any problem is when we get snow and it blows so it gets hard. I have one set of weights and a rear blade. On the front I have a loader with a blade. I took the regular blade off and mounted a combine tire I cut in half. It works great. You don"t...
  4. T

    Super C Hydraulics Not Working

    If I run mine low of Hyd oil the only way I can get it primed is to use air preasure in the oil fill hole to help it prime. My pump works great but it will not prime if I get air in the lines.
  5. T

    Henderson loader on a C

    I saw one sell a couple years back for around $150.
  6. T

    SC mounted planter

    I helped a buddy with a JD 290 and I put foam around the outside to help with that problem but I am wondering if either the plates are wrong or if you have to much speed. I plant with a rear mounted planter on my 200 with small amounts of seed for sweet corn. I have planted with as little as a...
  7. T

    460 utility loader??????

    I guess we are crazy, we had a loader on one for many years. We abused the heck out of it loading a lot for ourselves and even did quit a bit for neighbors. We even moved more dirt than I would ever try again with any loader for a bin site. The main repairs were to tie rods and a valve job. The...
  8. T

    Super C Hydraulics

    I have a 200 with a FH and another valve I use for loader or one way cyl. I had to install a blk between the FH valve and the Touch control. I have seen the blks on this sight before.
  9. T

    MF 135 stuck in gear

    My freind has a MF 135 that stuck in gear while pushing snow. I have not been around many MF. Does anyone have an idea to the cause and have an idea on how to get it back out.
  10. T

    Need help diagnosing Super C hydraulic problem

    I had a problem something like that and I had to take the back plate off. There was a small screen in one of the holes that was plugged. I don't remember any more put if you look at a parts book I think you will see it.
  11. T

    Planter Plates

    Sorry had a mistake on the first message. It was suppose to say 1892A MED not 1982A for the plate number.
  12. T

    Planter Plates

    I am using an old 2 row plate planter for sweet corn. I know there are numbers on bags but most of the time there isn't one on the sweet corn bags. Is there a way to match up a plate to the corn by looking. I know it wouldn't be perfect but good enough for sweet corn. I have about 4 sets of...
  13. T

    1566 fine metal filings

    Worked on one like that a few years back and it was a bearing in the final drive. At first we didn't even find filings but a gear froze to the top shaft. Fixed that and then the filters started plugging. Found it by draining the oil in the final drive and balls fell out.
  14. T

    super c

    A 200 is about the same and mine came with one on it. I never used it but it was on the tractor when I bought it. I bought it from a school and it was only used one year; they had just replaced it because the first deck was worn out.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top