(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    Message for jd2cyl1943

    I am confused. I see messages about ships in the Great Lakes and I thought the messages were a but mature for a fellow of your age, but also the messages about the old John Deere sound mature. So my question is are you the one who post messages about ships?
  2. M

    Re: Ever heard of

    Yes they (did ?) make hitches and jacks. Very good quality. I have been away from building trailer for a bit
  3. M

    Box End Wrenches

    I worked as a mechanic at a Ford dealer and later for an Allis Chalmers dealer. During this time I left my box end wrenches home as well as most of the open end wrenches. I never saw any need for the box end wrenches and never had to borrow wrenches. The big stuff was owned by the shop. I never...
  4. M

    Piston Rings in 1950's

    From 1953 Until 1960 I worked in a factory and workers would say, Saturday I am going to put a set of rings in my old Chevy They could buy the rings for about $12 and about $5at Western Auto for a set of gaskets for an in frame repair and they would be prepared for a couple years. Those days are...
  5. M

    Quik Krete Mix for Securing Posts

    I usually pour concreter with 5/1mix with bank run gravel and sand for securing pipe corner posts and the results have been good. I plan to try using Quik Krete and just pour in the hole and add water. Will it be as strong as mixing the bank run stuff and pouring in the hole wet?
  6. M

    Kioti Brake Repair

    Anybody ever take off the axle housing? I suppose I take off wheel,fender and axle housing. Is there a trick to removing axle housing?
  7. M

    Battery Rebate Follow Up

    A couple days ago I posted about a lawn and garden battery that went up in price. I bought it a month before it went dead nad took it back, They adjusted by the higher price. I had paid for a one year service at the lower price and they adjusted at the higher price. Yesterday I rook it back and...
  8. M

    Battery Warranty

    I bought a lawn and garden battery at Wal-Mart in June and it went bad July. It went bad in July. I took it back for a replacement and the price had increased by $5. Was I ripped off? It seems like it, but I suppose that is the way the warranty works. I guess the only gripe I have is that $5 is...
  9. M

    Cordless Grease Gun

    I am debating a cordless grease gun and do not know which to buy a Milwaukee or DeWalt. I want to hear from those who have used both.
  10. M

    Fuel Tank Repair

    My Kiota tractor has a leak in the fuel tank. I was wondering if anyone had any experience repairing a plastic diesel tank.
  11. M

    Differential Lock

    The activation rod was broken, Now all is ok. Thanks to all
  12. M

    Stuck Differential lock

    I have an IHC 574 and the differential lock is stuck. I have seldom, or perhaps never used the lock as I see no need for it. I cannot get down on the ground to see how it works. Maybe the linkage is broken. any suggestions?
  13. M

    Remove decal truck door

    Anybody remove decal from truck door without harming paint. I have heat gun and razor blade
  14. M

    Grandpa's Loader Cylinder

    I noticed that the cylinder was a one way with no down pressure. I stated that it looked like a one way after many people told how to rebuild. Docmirror reported that it was one way. Hope that Grandpa did not make this a bigger problem.
  15. M

    Pioneer coupler tool

    My hands are too weak to connect Pioneer couplers. Is there such a tool available to pull back the sleeve?
  16. M

    Thanks to all

    I thank you fellows who responded to my plea for assistance in changing a Microsoft Word document to PDF. I finally got it figured out.
  17. M

    Post Message PDF?

    I have written a report as a Microsoft Word document and wished to send as an attachment. The recipient has asked me to send it PDF. I do not know how to do this. I am not very good with computes so it must be complete instructions.
  18. M

    Ford Ranger 4x4

    I got my 2997 Ford Ranger in LOW 4x4 and cannot get it our. I tried backing and restarting engine, still in low 4x4 Help appreciated
  19. M

    .45 ACP ammo

    What is a fair price to ask for 1,000 rounds of ,45 ACP hardball?
  20. M

    Basic Ethics?

    Is it really honest to expect replacement tools if they have pipe to gain extra leverage?
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top