(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. E

    John Deere 4200 plow cylinder

    Hello I bought a john deere 4200 plow that was missing the cylinder to flip it over. I didnt think much of it till i learned that it is a john deere special one, a 3 - 5 1/2. I cant seem to find another supplier for it other then john deere itself, but its a 500 and some dollar part through...
  2. E

    820 two cylinder miss

    Hello, Ive got an 820 here that to me acted like it had blown a tip off an injector. It smokes alot of grey/brown smoke with raw fuel coming out the stack and spotting up the operator and the sheet metal. I pulled the injectors and they looked fine and tested good at 2300 psi. So now i geuss its...
  3. E

    Bad news on 7520 Jd

    I'd bought the neighbors 7520 John Deere earlier this year with the intent to pair it with my crust buster disk, but now I'm not sure what to do. He had retired two years ago, and this tractor has sat since then. I had to put great deal of time and a considerable expense into it to just get it...
  4. E

    7520 John Deere

    I bought a 7520 John Deere this last winter, and am just getting around to trying to get it to start. The guy who had it retired last year, and didn't use it the last two years he did farm. I've never been around one of these 7520's before, but am familiar with the 4020's, 3020's. This tractor...
  5. E

    Rebuilding pioneer conversion hydraulics

    It was a nice warm day here today, so I started on rebuilding the number one scv couplers on my 4430. I've got the I&T manual for it, but my tractor has had the pioneer conversion kits put in. I got the O-ring and seal kit from John Deere here in town, but the kit came with page two only of the...
  6. E

    Cenex machinery warranty

    I"ve been considering enrolling a couple tractors under the cenex total protection/extended protection warranty, and was curious about people"s experiences with the program. Good or not so good? Thanks
  7. E

    1566 steering delay problems

    I"ve got a 1566 ih that will not steer until it sets running for about ten minutes while I crank the wheel around. I normally just deal with this issue, but I am curious as to what the problem is? The oil in the transmission is not milky like it has water in it. Anybody know what"s happining?
  8. E

    G1000 tranny and rear end check?

    A buddy of mine just got a g1000 mm, and we"re trying to figure out how to check the tranny and rear end. Are they combined like the newer ones and run hy-tran or are they both separate and run 80-90? And where are they checked from? Thanks
  9. E

    1566 hydraulics

    Is it possible to add a third hydraulic unit to a 1566 ih? It's got two and I need a third for my beet digger. Anybody have any ideas? Thanks
  10. E

    Off topic: Anyone remember this movie?

    I got to thinking today about a movie that I saw long ago, but I only remember the beginning. How that came into my head again I"m not sure, but I"d like to know what movie it is. It"s about bootlegging beer in the south in the 70"s I believe. It wasn"t a Bandit movie. The only part I remember...
  11. E

    1566 ih

    Hello I'm looking at a 1566, and was about ready to buy it until we tried to start it and nothing at all happened. We cracked fuel lines at the head, and have fuel there. We can get it to turn over with the starter by jumping the terminals with a screwdriver, but it won't fire or even smoke. We...
  12. E

    1566 ih rear end fill tube

    Hello I"m looking at a 1566 ih, and I"m not very familiar with this generation of red tractors. On the rear of the tractor, it has a fill tube that is similar in design to what John Deere had from the mid 70"s to the late 80"s. But everybody is telling me that a 1566"s rear end is filled and...
  13. E

    Justifying a step deck

    Hello I have been tossing around the idea of getting a step deck trailer to haul my old machinery with. In the winter when im not working, i like to work on my older machinery.In the past, I have been known to get three or four pieces of machinery at one place that I have had to haul back one by...
  14. E

    560 diesel international

    I am looking at a 560 international diesel wheatland, and the story I got was that it just up and quit one day. When the tractor is pulled, it won"t smoke. Does this mean that something let loose in the pump? What do you guys think? Thanks
  15. E

    V4 wisconsin motors

    Hello Are the v4 wisconsin motors worth anything anymore, or are they fairly useless. Does anybody still run one on something? Thanks
  16. E

    WD9 injection pump seals

    Hello Does anybody know if the seals for a WD9 model A injection pump are still available? I have a few that need the front seal, some that need the rear between the primary pump and the big pump, and some that need both. Any help is appreitated. Thanks
  17. E

    WD9 pto bearings

    yesterday i looked at a wd9 and was told it has a bearing out of the pto. the tractor has been used as a pump tractor for about 20 years. I have run across this in a couple of my tractors in the past, but i have never tore into one to fix it myself. Has anybody on here changed this bearing out...
  18. E

    TD9

    Hello I recently bought a TD9 international with a overhead loader that runs on gas but not diesel. I gave 800 for it sight unseen. Do you guys think I just screwed up? I am starting to get a bit worried because I don"t want to be stuck with this machine. I bought it with the plan to free up...
  19. E

    UTS water pump

    hello Does anybody know if a kit is available for a water pump on a uts with the pump being part of the big front casting plate? i have found new pumps, but they dont have the big casting plate. The tractor is getting oil in the water and that is the only place i can think of that would let oil...
  20. E

    minneapolis 3 - bottom plow

    hello I recently got a 3 bottom minneapolis plow that i think has the model number of DF16. Does this sound correct? Can anybody give me some information on this plow? Is it possable to find parts yet or no? it is missing the plow shares, but everything else is there.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top