Search results

  1. J

    Glazed cluch plates

    I have a 1957 JD 420, I recently replace a lot of parts on the right side final drive. The steering clutch had been froze up for quite a few years. I broke everything loose and it seemed o.k. until I put the tractor under power and the clutch is now slipping. The plates and facings measure out...
  2. J

    One more question

    One more thing, the track rollers call for SAE 140 in the summer. What do you guys use or recommend for the rollers and idler wheel.
  3. J

    Final drive oil

    I am currently rebuilding a 1957 JD 420 C final drive, I got a new bearing kit and was wondering if I have to pack the bearing with grease, or if the the oil in the bottom of the final is supposed to work its way up there? If they need greased is there a specific grease I should use? Also the...
  4. J

    Oil for final drives

    I have a JD 420c, was wondering what type of oil to use in the final drives. Also is there a trick or a product out there to clean out the finals, because the one side that broke, the oil was pretty gummy.
  5. J

    parts list

    I have a JD 420 crawler, I'm assuming it's a 57 or later because it has a water pump. The serial tag has been removed and I am trying to order the bearings that go on either side of the bull gear. The parts manual has a two different bearings depending of the serial #(pre-141491 and...
  6. J

    John Deere MC crawler

    Hi all, I am trying to get the sprocket hub off of a 1952 JD MC. The manual I am using shows a nut on the end of the final drive axle. My crawler does not have a nut on the end of the axle. Any help would be greatly appreciated.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top