(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. V

    M602 rear seal replacment

    Time to replace the rear seal on the 1964 M602 diesel. Are they rope seals or modern round? Any good sources for quality seals? I know how to do both just need some advice of which type and best people to purchase from. Cheers from Arizona!
  2. V

    MM rear seal replacment

    Time to replace the rear seal on the 1964 M602 diesel. Are they rope seals or modern round? Any good sources for quality seals? I know how to do both just need some advice of which type and best people to purchase from. Cheers from Arizona!
  3. V

    301/1020 bucket dump super slow

    1974 JD 301 Industrial. All bucket functions work properly except when I go to dump over the bucket. Just very slow going over, stops sometimes, increase RPM a bit, and it goes just slow. New hyd pump, new lines, pressure checks OK, system serviced, rams rebuilt, etc. Everything else works...
  4. V

    Diesel glow plugs

    Has anyone ever installed glow plugs in a 602 diesel or the like? Ours won't start without ether or being warmed up. Might be a worthwhile winter project since it won't start:) Cheers!
  5. V

    Mystery plug on 1020

    There is a big hex plug maybe 1-1/4" rearmost of the differential right side that is leaking hyd fluid. Does anyone know how much fluid will come out of there if we pull it to reseal? Its back by the three point arms. Don't really want to pull it if all the hyd oil is going to come out:) Thanks
  6. V

    Fuel injector rebuilding

    Anybody know the best place to have our fuel injectors on MMoline 602D rebuilt and calibrated? Cheers!
  7. V

    602 Fuel injector rebuilding

    Anyone know the best place to send our fuel injectors on our 602D to have them checked out and re-calibrated? BTW I got one wheel moved out which was quite the nightmare. Now I wish I had just left it alone:) One to go:( Cheers from Arizona!
  8. V

    Moving the rear wheels on 602D

    Any advice on moving out the rear wheels on our 602D? We are still trying to get the two nuts loose:) We want to move them all the way out for new tire clearance. Nuts are awkward and super tight, already broke 3/4 breaker bar with cheater, heat and penetrant as well, probably haven't been...
  9. V

    13.6 x 38 tires needed in Arizona

    Hi we need two new or good used 13.6 x 38 tires for our Minn Moline 602 out here in Prescott Arizona. Anybody got any ideas or advice on what brand to buy and where? Dry here and the old Armstrongs are just about rotted off. Thanks much and cheers from Prescott!
  10. V

    Need tach drive and or gear

    Still need tach/speedo angle drive unit for Minneapolis Moline 602 diesel. Ratio 1 to 0.250 or cable drive gear for this unit. Stewart Warner 867SN.250G2 Thanks
  11. V

    MM 602

    This message is a reply to an archived post by Howard H. on August 30, 2018 at 10:02:42. The original subject was "Re: MM 602". Hi Howard just read your old post about your 602 pump running hot. Mine did too until I found that the last guy to install a new hyd filter got it tipped in the...
  12. V

    M602 Diesel tach drive wanted

    Looking for tach drive for M602 diesel PN; 10A12171 or gear that drives cable. 90 degree Stewart Warner unit of .250:1 ratio. Our drive gear is lost in the field somewhere :( Also need new tach cable as well. Thanks and cheers from Arizona!
  13. V

    How much weight will three point lift?

    Can't seem to find this info in our manual. Does anyone know how much weight the M602 three point will safely lift? We are using it with an arena spike drag that has concrete weights on it and I would say it weight about 400 lbs all up. Thanks for your help. Cheers!
  14. V

    Parts help compliment

    Just wanted to let yall know how helpful and a pleasure to work with Chris Quatmann at TMMCo (Jordan, MN) has been with parts for my MM M602. Don't run across that much anymore, a real handshake gentleman in my opinion. Will be my first go to for parts help. Just wanted to express my...
  15. V

    602 part

    Looking for 602D fender U shaped grab handle. Goes on left side front. Cheers from Arizona!
  16. V

    602D Hydraulic pump parts

    Need help finding seal kit for our 602D hyd pump. MM part number 10A16975 and or Webster 4YDS9-2R. Pump OK just leaks so need overhaul kit, seal kit or individual O-rings and such. Thanks in advance. Gary
  17. V

    MMoline tach drive parts

    Hello and Happy Thanksgiving to all! I am restoring a MM 602 Diesel and am in need of either a complete Steward Warner 667 tach drive or at least the gear in it that drives the tach cable. I have the unit but apparently the cover plate and cable drive gear fell out in some cornfield:) Any advice...
  18. V

    Tach drive or parts

    Hello and Happy Thanksgiving to all! I am restoring a MM 602 Diesel and am in need of either a complete Steward Warner 667 tach drive or at least the gear in it that drives the tach cable. I have the unit but apparently the cover plate and cable drive gear fell out in some cornfield:) Any...
  19. V

    Oil filter woes

    Hello again MM Folks! Well here the story, we just acquired a M602D and are in the learning curve of servicing it. We have the manuals on the way but I figured changing the filters would be straightforward. Fat chance. The oil filter internal can seems to be inflated so to speak. The end that...
  20. V

    MM 602 oil filter gaskets/orings

    Does anyone know where to buy the rubber oring/gaskets (2) for the M602 engine oil filter? We ordered new filters but they do not come with the orings. Thanks in advance.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top