(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. C

    656 pto

    Had a 656 brought to me with pto problems. Was not working. Was in few pieces. Linkage unhooked from spool valve and spool valve removed. Small pin is good. But bottom piece that fits outside and over 2 smaller springs was smashed flat. Ordered different spool from salvage yard. Ordered new top...
  2. C

    656 pto

    Had a 656 brought to me with pto problems. Was not working. Was in few pieces. Linkage unhooked from spool valve and spool valve removed. Small pin is good. But bottom piece that fits outside and over 2 smaller springs was smashed flat. Ordered different spool from salvage yard. Ordered new top...
  3. C

    Gleaner F no fuel issue

    Need help with a Gleaner F combine. It had been sitting in a shed for a while. Have fuel up to the injection pump but nothing to injectors. Can hear the fuel solenoid in the pump click with the key being turned on and off. Any tricks I am missing?
  4. C

    1070 hydraulic level

    I have an early 1070 gold demo and there are no sight glasses on the side of the transmission case. So I pulled the filler cap by the PTO and it looks like there was a dipstick on this cap at one time. There is no sign of it in the bottom of the transmission or pto. Any help on how to check level?
  5. C

    2290 Diff Lock

    My 2290 when I step down on the diff lock will go down. It does not engage the diff lock however. When I step on either brake, it releases the diff lock lever and the lever pops back up. It don't matter if the PTO is on or off. It appears in the manual the oil comes through the PTO valve to the...
  6. C

    2290 spindles

    Broke a RH front spindle on my 2290 yesterday moving manure. Called Titan and they didn't have one on stock but could get one for....sit down now..... $1600.00 WOW. I had ordered some from A&I in the past but was having problems with their quality of items lately. Ended up getting a used...
  7. C

    grinding feed

    Had to grind feed before the snow storm a week ago and snapped this. Then ice and snow again today. Already tired of winter.
  8. C

    1070 3pt. cable

    Early 1070 Gold Demo the 3pt. hitch lever would not affect 3pt. Took top off console. Tractor would raise 3pt. when it was started. When shut off the 3pt. settles. Found cable was broke where it came through the floor. Slid batteries ahead halfway, removed floor plate in cab ahead of seat, tires...
  9. C

    7810 pto light on dash

    Just bought a 7810 and the pto light is flashing on the dash. I pulled the fuse in the fuse panel and put it in diagnostics and came up with the following codes in the HCU 01 category: 027 which is calibration incomplete 052 which is hitch draft sensor fault I climbed underneath the 3pt where...
  10. C

    1070 Hydraulic level

    I have a 1070 Gold Demo with a PS transmission. Going downhill it free-wheeled with no brakes or steering. When at bottom it worked again as did PTO, hyd levers, and PS. Believe it was low on hydraulic level. Could not see any sight glasses on RH side or a dipstick in back. Remember reading...
  11. C

    upcoming case auction

    Here are a few things some members make appreciate to know about: https://www.proxibid.com/asp/Catalog.asp?aid=78374
  12. C

    Look what was waiting for me yesterday to get home

    Bought this a while back and it finally made it's way home to me yesterday while I was gone. Pleasant surprise when I got home. Has powershift transmission, factory air conditioning, park brake actually worked :shock: , and no oil leaks. Started right up when I got home at 10 pm and was 5...
  13. C

    case puller

    Seen this link somewhere else. Everyone commented how watch the first tractor put it on the others. Also watch the last tractor. Think it is the same one just weighted different. Goes to show it wasn"t a fluke. www.youtube.com]
  14. C

    manuren spreader chain

    I have a Rhorda manure spreader. They were out of Rock Valley, Iowa. They were bought out by Roda MFG. of Hull, IA. Since then Roda has sold off to I don't know who, maybe Artsway?? There are no markings on the spreader as far as what size or anything but I am guessing it at 300-350 bushel. It...
  15. C

    830 spin on engine oil filter conversion

    I have a customer looking for 3 kits to convert his 830 case tractors to spin on oil filters. Do I need a late comfort king? Will a 930 or 1030 setup work or 970/1070? Is there a spacer that is needed make it miss the steering shaft? I have read a little bit about each one but nothing that...
  16. C

    2294 won't move

    I have a 2294 i just bought. Came home the other night went to put into park and wouldn't go in completely. Tried to put back into gear but wouldn't go into a gear. Shut off tractor. started back up and went into gear but will not move forward or backward. Inching pedal is dumping oil when you...
  17. C

    1570 stars and stripes or spirit of 76

    Was wondering what people think a 1570 stars and stripes or spirit of 76 Case is worth? It has about 5500 hours, needs repainted, very original and straight, cast 18.4x38 duals, a/c not working and needs cab kit. Rear tires inside are about 90%, outside duals 30%, front tires 50%. Tractor seems...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top